Difference between revisions of "CNC Bender Technical Notes"

Revision as of 20:49, 12 July 2013

Technical Notes - Hardware

• AIS PC Panel - BIOS Setup for Power ON Boot
• Diagnosing Blue Screens with Windows minidump files
• Modicon Momentum modules used around the bender
• Linear Encoder models used
• Servo-controlled Valve Types
• Servo Valve Diagnosis
• SMT Teach Pendant
• Robot Clear

Technical Notes - Software

• CNC Bender Low Level Menu - CNC Processor Setup
• Discover the CNC Bender version installed by viewing the CNC Bender System Info Log
• Can CNC Bender use robots? See CNC Bender Robot Integration
• Configuring Machine Lube Settings
• Feed Axis Faults During Feed Bending
• CNC Bender General Application Errors
• CNC Bender Hardware Key
• CNC Bender: How to Offset the Home Position of a Pressure Die Servo Axis

Software Technical - Hardware & Software

• USB Network Interfaces Issue
• Netgear Wireless USB Adapters Issue
• Recommended D-Link Wireless USB adapter
• Drive Space - CNC Bender Parts
• Barcode Scanners - How they work with CNC Bender
• Wiring: Safety Relay to Servo Module Fault Input (for increased safety)
• Terminal Blocks
• Terminal Block Jumpers
• Wiring: Power to Mitsubishi RESET pin when E-Stop to clear Mitsubishi drives every time E-Stop is pressed.
• Wiring: Keeping the Mitsubishi Drives Powered when E-Stop (used on newer benders)
• Wiring: Finding 120 VAC in a CNC Bender Lite operator station for new 120VAC Pro-face PC Panel
• CNC Bender Electronics Parts List Reference
• Modicon
• Momentum
• Modicon Momentum
• I2T Serial Port Adapter

Other Pages

• Back to CNC Bender page
• Back to CNC Bender General Information page