Difference between revisions of "Setup VTube-LASER for the Network License Manager"

Revision as of 16:37, 16 May 2014

Use these steps to setup VTube-LASER for use with the Network License Manager software.

Start the NLM software on the server computer. (See Network License Manager for more information.)

Find and load the "vtube local settings.cfg" file into a notepad editor.

In Windows Vista and Windows 7, the path will be: c:\ProgramData\VTube

In Windows XP, the path will be: c:\Documents and Settings\All Users\Application Data\Vtube

Find the [Hardware Key] section:

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser

Change the address to the address of your server IP. (This entry is an example)

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=0
License Type=Laser

Change the Enable Network value to 1.

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17500
Receive From NLM Port=17501
Enable Network=1
License Type=Laser

Save and close the cfg file then run VTube.

@@ Line 10: / Line 10: @@
 </td>
 <td width=300>
-[[image:vtube-laser_screen_1_54.jpg|300px]]
+[[image:Vtube-laser_1.77.3.jpg|300px]]
 </td>
 </tr>