Difference between revisions of "VTube-STEP v1.91"

Revision 1.91

• Back to VTube-STEP
• Back to VTube-STEP Revisions
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

VTube-STEP now automatically calculates the cut length during calculation of the centerline from solid model.

The math engine uses the current tube elongation percentage to reduce the cut length to account for elongation in the bends.

If the wall thickness is zero after a centerline calculation from solid model, then VTube now automatically inserts a value of 0.001" (or 0.0254mm) into the part setup. This cleans up the image by removing solid ends in the display.

The Quickload window has a new button that allows you to find the default VTube folder in public documents quickly.

• We added a second type of report per a customer spec.
• The reports are now built to both comma delimted and tab delimited files.
• The reports can be sent directly to Excel.
  
  

Load the batch reporter in the Report menu of either STEP mode of LASER mode:

This is a sample report file:

If the batch reporter finds files with 0 or negative length straights, then it will issue a WARNING at the end of the report log and create a second report file containing a list of all the project files with these lengths:

• Now you can press the Enter key to close the information dialog.
  
  
• Comments display in a dialog during project load
  
  
• The "Clear text" button in the editor box works again.