Difference between revisions of "Surface Spray"

Revision as of 18:57, 24 February 2017

Removable surface sprays are helpful for coating surfaces that are highly reflective or very black. Then can also aid in marking the area to measure.

<

Very thin coating
Designed for laser scanning
Cleaning with a wipe is easy.
Is not as dense as Magnaflux or Dynaflux. Thick coating is not necessary. The goal of the spray is to break the reflectivity - for which a complete covering is not necessary.
$30 per can (as of February 2017)
See 3DScanSpray.com

Inexpensive
Does not cause an allergic reaction like the flux types below.
Much less messy than alcohol and powder.
Cleaning with a wipe is easy.
Is not as dense as Magnaflux or Dynaflux. Thick coating is not necessary. The goal of the spray is to break the reflectivity - for which a complete covering is not necessary.
Consistent levels of coating, however, is preferred. Magnaflux and Dynaflux (see below) excel in consistency.

Magnaflux Spotcheck SKD-S2 Developer

Dynaflux DF315-16 Crack Check D-F Developer

Works well
DF315-16 Flammable Nuclear grade uses non-chlorinated solvent
DNF315-16 Non-flammable Standard grade
Very inexpensive ($5 per can)
For applications that require cleaning, the corresponding cleaner uses the same Dynaflux part number.
May cause an allergic reaction in the skin of some operators

CerMark LMM6000 Laser Marking Spray

@@ Line 1: / Line 1: @@
 <table>
 <tr cellpadding=10>
-<td width=300>
+<td width=225>
-[[image:vtube-laser_logo.jpg|300px]]
+[[image:vtube-laser_logo_1.96.png|300px]]
 Removable surface sprays are helpful for coating surfaces that are highly reflective or very black.  Then can also aid in marking the area to measure.<br><br>
 * Back to [[Surface Coating for LASER Scanning]]
 * Back to [[VTube-LASER]]
+<
 </td>
 <td width=300>
-[[image:vtube-laser_1_73.jpg|300px]]
+[[image:vtube-laser_v2.7_screenshot.png|400px]]
 </td>
 </tr>