Difference between revisions of "Cycle Hold"
From ATTWiki
| Line 4: | Line 4: | ||
# Regular Cycle Hold | # Regular Cycle Hold | ||
| − | # Cycle Hold Safe Mode | + | # [[Safe Mode Cycle Hold]] |
| + | |||
| + | ==Regular CYCLE HOLD== | ||
| + | In regular Cycle Hold, the bender pauses, but all axes stay energized. | ||
| + | |||
| + | ==Safe Mode CYCLE HOLD== | ||
| + | [[Safe Mode Cycle Hold]] is activated when the safety mat or safety scanners are activated. In this state, the bender is de-energizes all axes and most outputs. See the [[Safe Mode Cycle Hold]] page for more details. | ||
Revision as of 21:24, 2 July 2007
Cycle Hold is the button that sets CNC Bender into a pause state for motion. Cycle Start is the opposite of Cycle Hold.
There are two Cycle Hold states:
- Regular Cycle Hold
- Safe Mode Cycle Hold
Regular CYCLE HOLD
In regular Cycle Hold, the bender pauses, but all axes stay energized.
Safe Mode CYCLE HOLD
Safe Mode Cycle Hold is activated when the safety mat or safety scanners are activated. In this state, the bender is de-energizes all axes and most outputs. See the Safe Mode Cycle Hold page for more details.
