Difference between revisions of "Setup VTube-LASER for the Network License Manager"
From ATTWiki
(→Step 4) |
(→Step 5) |
||
| Line 58: | Line 58: | ||
NLM IP Address=192.168.0.100 | NLM IP Address=192.168.0.100 | ||
Network Timeout=10 | Network Timeout=10 | ||
| − | Send To NLM Port= | + | Send To NLM Port=17502 |
| − | + | ||
Enable Network=1 | Enable Network=1 | ||
License Type=Laser | License Type=Laser | ||
</pre> | </pre> | ||
| − | |||
==Step 6== | ==Step 6== | ||
Save and close the cfg file then run VTube. | Save and close the cfg file then run VTube. | ||
Revision as of 20:07, 24 June 2019
|
Back to VTube-LASERUse these steps to setup VTube-LASER for use with the Network License Manager software.
|
|
STEP 1
Start the NLM software on the server computer. (See Network License Manager for more information.)
STEP 2
Edit the "vtube local settings.cfg" file in a notepad editor.
In Windows Vista, Windows 7, and Windows 8 the file is located in C:\Users\Public\Documents\VTube\config.
Step 3
Find the [Hardware Key] section:
[Hardware Key] NLM IP Address=127.0.0.1 Network Timeout=10 Send To NLM Port=17502 Enable Network=0 License Type=Laser
(Note: The "Receive From NLM Port" value is obsolete in VTube versions released in late 2018.)
Step 4
Change the address to the address of your server IP. (This entry is an example)
[Hardware Key] NLM IP Address=192.168.0.100 Network Timeout=10 Send To NLM Port=17502 Enable Network=0 License Type=Laser
Step 5
Change the Enable Network value to 1.
[Hardware Key] NLM IP Address=192.168.0.100 Network Timeout=10 Send To NLM Port=17502 Enable Network=1 License Type=Laser
Step 6
Save and close the cfg file then run VTube.
