Difference between revisions of "Setup VTube-LASER for the Network License Manager"

Latest revision as of 20:08, 24 June 2019

STEP 1

Start the NLM software on the server computer. (See Network License Manager for more information.)

STEP 2

Edit the "vtube local settings.cfg" file in a notepad editor.

In Windows Vista, Windows 7, Windows 8, and Windows 10 the file is located in C:\Users\Public\Documents\VTube\config.

Step 3

Find the [Hardware Key] section:

[Hardware Key]
NLM IP Address=127.0.0.1
Network Timeout=10
Send To NLM Port=17502
Enable Network=0
License Type=Laser

(Note: The "Receive From NLM Port" value is obsolete in VTube versions released in late 2018.)

Step 4

Change the address to the address of your server IP. (This entry is an example)

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17502
Enable Network=0
License Type=Laser

Step 5

Change the Enable Network value to 1.

[Hardware Key]
NLM IP Address=192.168.0.100
Network Timeout=10
Send To NLM Port=17502
Enable Network=1
License Type=Laser

Step 6

Save and close the cfg file then run VTube.