Difference between revisions of "VTube NUMALLIANCE Bender Correction"

From ATTWiki
Jump to: navigation, search
(→‎STEP 9)
 
(29 intermediate revisions by one user not shown)
Line 1: Line 1:
−
[[image:VTube-LASER_AssemblyOverModel.png|400px]]
+
[[image:VTube-LASER_AssemblyOverModel.png|300px]]
−
[[image:Numalliance Splash.png|500px]]<br><br>
+
[[image:RightOrangeArrow.png|200px]]
 +
[[image:Numalliance Splash.png|300px]]<br><br>
  
 
<table width=1000>
 
<table width=1000>
 
<tr valign=top>
 
<tr valign=top>
 
<td width=300>
 
<td width=300>
−
This page describes the use of the VTube-LASER to NUMALLIANCE bender corrections.<br><br>
+
This page describes how to use VTube-LASER to correct NUMALLIANCE benders.<br><br>
 
<br><br>
 
<br><br>
  
Line 23: Line 24:
  
 
<td width=300>
 
<td width=300>
−
VTube-LASER has an export option for NUMALLIANCE CSV files that is used to '''correct''' the NUMALLIANCE benders.<br><br>
+
VTube-LASER has an export option for NUMALLIANCE MES files that are used to correct the NUMALLIANCE benders.<br><br>
 
Note: NUMALLIANCE benders only require the ''measured'' data for corrections.<br><br>
 
Note: NUMALLIANCE benders only require the ''measured'' data for corrections.<br><br>
 
Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.
 
Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.
 +
<br><br>
 +
Follow the steps below.
 +
 +
</td>
 +
 +
<td>
 +
[[image:NumallianceCorrectionsSlide1.png|800px]]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
==STEP 1==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
Press the Bender Setup button. (These steps assume that you have measured the tube and have setup VTube-LASER with the NUMALLIANCE protocol.)
 +
 +
</td>
 +
 +
<td>
 +
[[image:Numalliance1.png|800px]]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
==STEP 2==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
Set the bender number.  It should say NUMALLIANCE like shown here.
 +
<br><br>
 +
If the data in the window is not correct, then import the data from the main VTube-LASER memory by clicking on "Setup this Window" then clicking on "Copy Master LRA to Setup LRA".
 +
<br><br>
 +
In the "Correct the Bender" menu, click on Auto Send.
 +
<br><br>
 +
A save file dialog will open and allow you to name the MES file on a thumb drive or on the network.  This file will be imported into the NUMALLIANCE control.
 +
 +
</td>
 +
 +
<td>
 +
[[image:Numalliance2.png|800px]]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
==STEP 3==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
At the NUMALLIANCE control, press the CAD button.
 +
<br><br>
 +
 +
</td>
 +
 +
<td>
 +
[[image:NumallianceCADbutton.png|800px]]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
==STEP 4==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
Press the XYZ/LRA button.<br><br>
 +
</td>
 +
 +
<td>
 +
[[image:NumallianceXYZLRA.png|800px]]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
==STEP 5==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
Press the File button.
 +
<br><br>
 +
Press the Import corrections button.
 +
 +
</td>
 +
 +
<td>
 +
[[image:NumallianceFileAndImport.png|800px]]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
==STEP 6==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
Open the file from VTube.
  
 
</td>
 
</td>
  
 
<td>
 
<td>
−
[[image:VTube-LASER Correcting a NUMALLIANCE Bender.png|800px]]
+
[[image:NumallianceOpenMESfile.png|800px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Latest revision as of 23:29, 25 November 2019

VTube-LASER AssemblyOverModel.png RightOrangeArrow.png Numalliance Splash.png

This page describes how to use VTube-LASER to correct NUMALLIANCE benders.

Back to VTube-LASER

Contents


NUMALLIANCE CORRECTIONS

VTube-LASER has an export option for NUMALLIANCE MES files that are used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

Follow the steps below.

NumallianceCorrectionsSlide1.png



STEP 1

Press the Bender Setup button. (These steps assume that you have measured the tube and have setup VTube-LASER with the NUMALLIANCE protocol.)

Numalliance1.png



STEP 2

Set the bender number. It should say NUMALLIANCE like shown here.

If the data in the window is not correct, then import the data from the main VTube-LASER memory by clicking on "Setup this Window" then clicking on "Copy Master LRA to Setup LRA".

In the "Correct the Bender" menu, click on Auto Send.

A save file dialog will open and allow you to name the MES file on a thumb drive or on the network. This file will be imported into the NUMALLIANCE control.

Numalliance2.png



STEP 3

At the NUMALLIANCE control, press the CAD button.

NumallianceCADbutton.png



STEP 4

Press the XYZ/LRA button.

NumallianceXYZLRA.png



STEP 5

Press the File button.

Press the Import corrections button.

NumallianceFileAndImport.png



STEP 6

Open the file from VTube.

NumallianceOpenMESfile.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube_NUMALLIANCE_Bender_Correction&oldid=40302"