Difference between revisions of "VTube-LASER FARO Arm Riser"

From ATTWiki
Jump to: navigation, search
(→‎About FARO Arm Risers)
 
(28 intermediate revisions by one user not shown)
Line 14: Line 14:
  
  
−
[[image:vtube-laser_riser_overall.png|200px]]<br><br>
 
  
−
== About FARO Arm Risers==
+
<table>
  
 +
<tr valign="top">
 +
<td width=400>
 +
Arm risers make tube measuring easier by lifting the arm higher over the tube shape. The effect is to make the arm feel lighter. It also gives better clearance for moving over the tube.<br><br>
  
−
<table>
+
The riser shown in this image was first shown at the FABTECH 2016 trade show.
 +
 
 +
Two of these risers have been tested for several months (in our office and at [http://mandrelbending-tubefabrication.com/ AutoJet-Muffler].
  
−
<tr>
+
Based on our experience, we can strongly recommend this riser at this height for measuring a tube with a 9 foot FARO ScanArm.<br><br>
−
<td width=300>
+
−
Risers can make tube measuring easier by lifting the arm off the table.<br><br>
+
−
(This is a riser we designed that you can purchase from Advanced Tubular Technologies, Inc.)<br><br>
+
−
After testing this riser, we strongly recommend that you consider using a riser like this to give you better clearance when approaching the tube for scanning.<br><br>
+
  
 +
Purchase this riser in our store: [https://www.advancedtubulartech.com/shop ARM RISER in Advanced Tubular Store].<br><br>.<br><br>
 +
[[image:vtube-laser_riser_closeup_whitebackground.png|300px]]
 
</td>
 
</td>
 
<td>
 
<td>
−
[[image:vtube-laser_riser_user.png|400px]]
+
[[image:vtube-laser_riser_withfaroedge.png]]
 
</td>
 
</td>
 
</tr>
 
</tr>
Line 36: Line 38:
 
<br>
 
<br>
  
−
[[image:vtube-laser_riser_closeup.png|400px]]
+
[[image:vtube-laser_riser_user.png|600px]]<br><br>
  
 
==Other Pages==
 
==Other Pages==
  
 
*Back to the [[VTube-LASER]] page
 
*Back to the [[VTube-LASER]] page

Latest revision as of 15:54, 23 August 2022

Vtube-laser logo 1.96.png

Vtl screen hd scanner without logo.png



Arm risers make tube measuring easier by lifting the arm higher over the tube shape. The effect is to make the arm feel lighter. It also gives better clearance for moving over the tube.

The riser shown in this image was first shown at the FABTECH 2016 trade show.

Two of these risers have been tested for several months (in our office and at AutoJet-Muffler.

Based on our experience, we can strongly recommend this riser at this height for measuring a tube with a 9 foot FARO ScanArm.

Purchase this riser in our store: ARM RISER in Advanced Tubular Store.

.

Vtube-laser riser closeup whitebackground.png

Vtube-laser riser withfaroedge.png


Vtube-laser riser user.png

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_FARO_Arm_Riser&oldid=43072"