Difference between revisions of "HEXAGON Absolute Arm Feature Packs or Control Packs"

From ATTWiki
Jump to: navigation, search
(→‎8-Series Arm Control Pack)
(→‎CP-Series Arm Control Pack)
Line 94: Line 94:
 
<td width=300 valign=top>
 
<td width=300 valign=top>
  
−
===CP-Series Arm Control Pack===
+
===2021 (Newer) CP-Series Arm Control Pack===
 
This is the HEXAGON Absolute Arm Control Pack that is attached to the back base of the 8-series arms. It includes ports for power and Ethernet.<br><br>
 
This is the HEXAGON Absolute Arm Control Pack that is attached to the back base of the 8-series arms. It includes ports for power and Ethernet.<br><br>
 
There is no USB port in the CP-series of control packs. Only an Ethernet cable must be connected. These control packs will automatically serve an IP address to your computer.
 
There is no USB port in the CP-series of control packs. Only an Ethernet cable must be connected. These control packs will automatically serve an IP address to your computer.

Revision as of 17:50, 3 October 2022

Information about HEXAGON Absolute Arm Hardware

VTube-LASER HEXAGONRDS with AS1 Scanner.png


See also RDS Versions for ROMER Scanners

Contents


Cables Between Arms and Computers

NEWER ARMS: Two Cables Per ROMER Arm

The newer ROMER scanners communicate with the computer using:

  1. A TCP/IP connection using an Ethernet cable is used to give feedback from the SCANNER.

  2. A power cable

You will need one open Ethernet port and one open USB port for the ROMER arm connection.

OLDER ARMS: Three Cables Per ROMER Arm

The older ROMER scanners communicate using:

  1. A TCP/IP connection using an Ethernet cable is used to give feedback from the SCANNER.

  2. A USB cable connection is used to send the ball probe position.

  3. A power cable

You will need one open Ethernet port and one open USB port for the ROMER arm connection.

ROMER cable computer end.png

Arm Feature Packs or Control Packs

7-Series Arm Feature Pack

This is the ROMER Scanning Pack that is attached to the back base of the 7-series arms. It includes ports for power, USB, and Ethernet.

If you are using a laser scanner, then the Ethernet cable must be connected and setup with the proper IP address.

ROMER Scanning Pack - 7 series.png ROMER Scanning Pack - 7 series with arm.png

Original 8-Series Arm Control Pack

This is the HEXAGON Absolute Arm Control Pack that is attached to the back base of the 8-series arms. It includes ports for power, USB, and Ethernet.

If you are using a laser scanner, then the Ethernet cable must be connected. These control packs will automatically serve an IP address to your computer.

ROMER Scanning Pack - 8 series front.png ROMER Scanning Pack - 8 series back.png

2021 (Newer) CP-Series Arm Control Pack

This is the HEXAGON Absolute Arm Control Pack that is attached to the back base of the 8-series arms. It includes ports for power and Ethernet.

There is no USB port in the CP-series of control packs. Only an Ethernet cable must be connected. These control packs will automatically serve an IP address to your computer.

ROMER Scanning Pack - CP series front.png ROMER Scanning Pack - CP series back.png





Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=HEXAGON_Absolute_Arm_Feature_Packs_or_Control_Packs&oldid=43223"