Difference between revisions of "TubeCAD Pro v8-20071024"
From ATTWiki
| Line 15: | Line 15: | ||
Length Between Bends +22.62 mm ( +22 1/2 mm) | Length Between Bends +22.62 mm ( +22 1/2 mm) | ||
</pre> | </pre> | ||
| + | <pre> | ||
Rotation (+/- 180 Degrees) +0.0 deg ( SP) | Rotation (+/- 180 Degrees) +0.0 deg ( SP) | ||
| + | </pre> | ||
<pre> | <pre> | ||
Point 2 to Point 3 +72.63 mm ( +72 3/4 mm) | Point 2 to Point 3 +72.63 mm ( +72 3/4 mm) | ||
| Line 26: | Line 28: | ||
Length Between Bends +98.75 mm ( +98 3/4 mm) | Length Between Bends +98.75 mm ( +98 3/4 mm) | ||
| + | </pre><pre> | ||
Rotation (+/- 180 Degrees) -149.9 deg ( CW) | Rotation (+/- 180 Degrees) -149.9 deg ( CW) | ||
| − | + | </pre><pre> | |
| + | |||
| + | Point 3 to Point 4 +148.20 mm ( +148 1/4 mm) | ||
| + | Angle of Bend +88.8 deg ( | ||
| + | Bend 3 Radius +25.00 mm ( +25 mm) | ||
| + | |||
: | : | ||
: | : | ||
Revision as of 15:08, 24 October 2007
FIX for TubeCAD Long Chart
The ROTATIONS in the TubeCAD LONG chart were inserted one row too high. The
Bend 1 Radius +25.00 mm ( +25 mm)
Tangent Distance +25.07 mm ( +25 mm)
Arc Length +39.34 mm ( +39 1/4 mm)
Arc Length Adjusted +39.34 mm ( +39 1/4 mm)
Point 2 to Point 3 +72.63 mm ( +72 3/4 mm)
Length Between Bends +22.62 mm ( +22 1/2 mm)
Rotation (+/- 180 Degrees) +0.0 deg ( SP)
Point 2 to Point 3 +72.63 mm ( +72 3/4 mm)
Angle of Bend +89.9 deg (
Bend 2 Radius +25.00 mm ( +25 mm)
Tangent Distance +24.95 mm ( +5 mm)
Arc Length +39.22 mm ( +39 1/4 mm)
Arc Length Adjusted +39.22 mm ( +39 1/4 mm)
Point 3 to Point 4 +148.20 mm ( +148 1/4 mm)
Length Between Bends +98.75 mm ( +98 3/4 mm)
Rotation (+/- 180 Degrees) -149.9 deg ( CW)
Point 3 to Point 4 +148.20 mm ( +148 1/4 mm) Angle of Bend +88.8 deg (Bend 3 Radius +25.00 mm ( +25 mm)
TubeCAD Long
Part Number TEST PART
Outer Diameter +12.70 mm ( +12 3/4 mm)
Offset End One +0.00 mm ( 0 mm)
End to Tangent +48.03 mm ( +48 mm)
Point 1 to Point 2 +73.10 mm ( +73 mm)
Angle of Bend +90.2 deg (
Bend 1 Radius +25.00 mm ( +25 mm)
Tangent Distance +25.07 mm ( +25 mm)
Arc Length +39.34 mm ( +39 1/4 mm)
Arc Length Adjusted +39.34 mm ( +39 1/4 mm)
Point 2 to Point 3 +72.63 mm ( +72 3/4 mm)
Length Between Bends +22.62 mm ( +22 1/2 mm)
Rotation (+/- 180 Degrees) +0.0 deg ( SP)
Point 2 to Point 3 +72.63 mm ( +72 3/4 mm)
Angle of Bend +89.9 deg (
Bend 2 Radius +25.00 mm ( +25 mm)
Tangent Distance +24.95 mm ( +5 mm)
Arc Length +39.22 mm ( +39 1/4 mm)
Arc Length Adjusted +39.22 mm ( +39 1/4 mm)
Point 3 to Point 4 +148.20 mm ( +148 1/4 mm)
Length Between Bends +98.75 mm ( +98 3/4 mm)
Rotation (+/- 180 Degrees) -149.9 deg ( CW)
Point 3 to Point 4 +148.20 mm ( +148 1/4 mm)
Angle of Bend +88.8 deg (
Bend 3 Radius +25.00 mm ( +25 mm)
