Difference between revisions of "Benderlink Ethernet Module for PINES to Vector"

From ATTWiki
Jump to: navigation, search
(→‎Inside the Module)
(→‎Purchasing)
 
(17 intermediate revisions by one user not shown)
Line 5: Line 5:
 
| This is a single port Benderlink Ethernet Module that works with Benderlink for Pines to connect a TS-2000 (Pines) control to an Eaton Leonard Vector 1 measuring center.
 
| This is a single port Benderlink Ethernet Module that works with Benderlink for Pines to connect a TS-2000 (Pines) control to an Eaton Leonard Vector 1 measuring center.
 
<br><br>
 
<br><br>
−
This device is 100% Eaton Leonard Vector 1 Compatible.  Any standard Vector 1 bender port can connect with this module.  It is placed near the Vector 1 Laservision measuring center.
+
This device is 100% Eaton Leonard Vector 1 Compatible.  Any standard Vector 1 bender port can connect with this module.  It is placed near the Vector 1 Laservision measuring center.<br><br>
 +
 
 +
Download the [http://www.advancedtubular.com/blink_pines/blinkpines2vector_module_datasheet.pdf PDF Datasheet] shown here.
 +
 
 
| [[image:Blinklines2vector_pdfimage.jpg|300px]]
 
| [[image:Blinklines2vector_pdfimage.jpg|300px]]
 
|}
 
|}
Line 17: Line 20:
 
|-
 
|-
 
|  
 
|  
−
* One RJ-45 port - This connects to the Ethernet.
+
* One RJ-45 port - This connects to the Ethernet.<br><br>
−
* One Military Connector - This connector follows the legacy Eaton Leonard style connection.  You can connect standard communications cable with circular connectors at either end.
+
* One Military Connector - This connector follows the legacy Eaton Leonard style connection.  You can connect standard communications cable with circular connectors at either end.<br><br>
 
* One Power Port - Any voltage from 90 to 264 VAC accepted.
 
* One Power Port - Any voltage from 90 to 264 VAC accepted.
−
| [[image:Blinklines2vector_pdfimage.jpg|300px]]
+
| [[image:Blink_module_vector_test2.jpg|300px]]
 
|}
 
|}
  
Line 29: Line 32:
 
|-
 
|-
 
| This is an image of the inside of the module.<br><br>
 
| This is an image of the inside of the module.<br><br>
−
*The Current Loop board is in the upper left corner.<br><br>
+
*[[image:cb-el1_render1.jpg|right|150px]]The Advanced Tubular Current Loop board is in the upper left corner.  This board makes the connection 100% compatible with Eaton Leonard electronics.<br><br>
 
*The Ethernet Serial Device Server is the black box on the right.<br><br>
 
*The Ethernet Serial Device Server is the black box on the right.<br><br>
 
*The power supply is on the lower left.<br><br>
 
*The power supply is on the lower left.<br><br>
Line 36: Line 39:
  
 
==Example Installation==
 
==Example Installation==
 +
 +
{| border="0" cellpadding="5" cellspacing="0" align="none" width=700
 +
|-
 +
| This is an image of the box installed on a test bench computer running Benderlink for Eaton Leonard, which simulates Vector 1 Laservision communications.<br>
 
<br>
 
<br>
−
This is an image of the box installed on a test bench computer running Benderlink for Eaton Leonard, which simulates Vector 1 Laservision communications.<br>
+
In this application, the module was connected to a PINES 100 running Benderlink for PINES and TS-2000.
−
<br>
+
| [[image:Blink_module_vector_test1.jpg|300px]]
−
[[image:Blink_module_vector_test1.jpg|300px]]
+
|}
  
  
 
==Purchasing==
 
==Purchasing==
 
<BR>
 
<BR>
−
This item can be purchased from our [http://advanced-tubular-technologies.stores.yahoo.net/beculomo4po.html Online Store]
+
The Benderlink Ethernet Module can be purchased from our [http://advanced-tubular-technologies.stores.yahoo.net/bencab.html Online Store]
  
 
==Other Pages==
 
==Other Pages==

Latest revision as of 15:33, 21 November 2008


This is a single port Benderlink Ethernet Module that works with Benderlink for Pines to connect a TS-2000 (Pines) control to an Eaton Leonard Vector 1 measuring center.



This device is 100% Eaton Leonard Vector 1 Compatible. Any standard Vector 1 bender port can connect with this module. It is placed near the Vector 1 Laservision measuring center.

Download the PDF Datasheet shown here.

Blinklines2vector pdfimage.jpg


About the Connections

  • One RJ-45 port - This connects to the Ethernet.

  • One Military Connector - This connector follows the legacy Eaton Leonard style connection. You can connect standard communications cable with circular connectors at either end.

  • One Power Port - Any voltage from 90 to 264 VAC accepted.
Blink module vector test2.jpg

Inside the Module

This is an image of the inside of the module.

  • Cb-el1 render1.jpg
    The Advanced Tubular Current Loop board is in the upper left corner. This board makes the connection 100% compatible with Eaton Leonard electronics.

  • The Ethernet Serial Device Server is the black box on the right.

  • The power supply is on the lower left.

 Blink module vector test3.jpg

Example Installation

This is an image of the box installed on a test bench computer running Benderlink for Eaton Leonard, which simulates Vector 1 Laservision communications.


In this application, the module was connected to a PINES 100 running Benderlink for PINES and TS-2000.

Blink module vector test1.jpg


Purchasing


The Benderlink Ethernet Module can be purchased from our Online Store

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Benderlink_Ethernet_Module_for_PINES_to_Vector&oldid=8909"