Difference between revisions of "Restart the HASP Service"
From ATTWiki
| (16 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
| + | <table> | ||
| + | <tr> | ||
| + | <td width=250> | ||
Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver: | Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver: | ||
| + | </td> | ||
| + | <td> | ||
| + | [[image:hasp_hl_pro.jpg|250px]] | ||
| + | </td> | ||
| + | </tr> | ||
| − | + | <tr> | |
| − | + | <td> | |
| − | < | + | Go to the [http://www.advancedtubular.com/utilitysoftware.htm Utility Software] page and download the HASP Command Line Hardware Key Driver. The haspdinst.exe software is zipped in this download. |
| − | + | </td> | |
| + | <td> | ||
| + | </td> | ||
| + | </tr> | ||
| − | + | </table> | |
| − | + | <table cellpadding=10> | |
| − | < | + | <tr> |
| − | < | + | <td width=250> |
| − | This will "kill process" and "install" the driver again. | + | '''STEP 1''' - Remove the HASP hardware key(s) from the USB port(s) on the computer. |
| + | </td> | ||
| + | <td> | ||
| + | </td> | ||
| + | </tr> | ||
| + | |||
| + | <tr> | ||
| + | <td> | ||
| + | '''STEP 2''' - From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory. | ||
| + | </td> | ||
| + | <td> | ||
| + | '''haspdinst -fr -kp -purge''' | ||
| + | </td> | ||
| + | </tr> | ||
| + | |||
| + | <tr> | ||
| + | <td> | ||
| + | '''STEP 3''' - Reboot the computer. | ||
| + | </td> | ||
| + | <td> | ||
| + | </td> | ||
| + | </tr> | ||
| + | |||
| + | <tr> | ||
| + | <td> | ||
| + | '''STEP 4''' - From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again. | ||
| + | </td> | ||
| + | <td> | ||
| + | '''haspdinst -kp -i''' | ||
| + | </td> | ||
| + | </tr> | ||
| + | |||
| + | </table> | ||
| + | |||
| + | ==Other== | ||
| + | *Back to [[Hardware key]] | ||
Latest revision as of 18:14, 25 January 2011
|
Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver: |
|
|
Go to the Utility Software page and download the HASP Command Line Hardware Key Driver. The haspdinst.exe software is zipped in this download. |
|
STEP 1 - Remove the HASP hardware key(s) from the USB port(s) on the computer. |
|
|
STEP 2 - From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory. |
haspdinst -fr -kp -purge |
|
STEP 3 - Reboot the computer. |
|
|
STEP 4 - From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again. |
haspdinst -kp -i |
Other
- Back to Hardware key
