Difference between revisions of "VTube-LASER Videos for HEXAGON ROMER"

From ATTWiki
Jump to: navigation, search
(→‎Version 2.9.10)
(→‎Version 4)
 
(82 intermediate revisions by one user not shown)
Line 4: Line 4:
  
 
See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page.<br><br>
 
See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page.<br><br>
−
* Back to [[VTube-LASER]] Knowledgebase Page<br><br>
+
* Back to [[VTube-LASER]] Knowledgebase Page<br>
 +
* Back to the [[VTube-LASER Videos]] Page<br><br>
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>
Line 16: Line 17:
  
  
 +
 +
 +
 +
 +
===Version 4===
 +
 +
====Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations ====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.
 +
<td width=200>
 +
[[image:vtl_v4_ProperEndStraightScanningForGoodEndPoints.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View video [https://www.advancedtubular.com/vtube-laser/20230224_TutorialForProperEndStraightScanning.mp4 MP4]
 +
* View video [https://vimeo.com/802070332 Vimeo]
 +
* View video [https://youtu.be/p_ZVOR4DDC8 YouTube]
 +
 +
</td>
 +
</tr>
 +
</table>
 +
 +
====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.
 +
<td width=200>
 +
[[image:vtl_v4_DCPTutorial.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]
 +
* View video [https://vimeo.com/796424925 Vimeo]
 +
* View video [https://youtu.be/CLcExwN-pTA YouTube]
 +
 +
</td>
 +
</tr>
 +
</table>
 +
 +
====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.
 +
<td width=200>
 +
[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]
 +
* View Video [https://vimeo.com/747812907 Vimeo]
 +
* View Video [https://youtu.be/ZosWxq4A4NU YouTube]
 +
</td>
 +
</tr>
 +
</table>
 +
 +
===Version 3.2===
 +
 +
====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows set up VTube-LASER to correct SMI benders.
 +
<td width=200>
 +
[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]
 +
</td>
 +
</tr>
 +
</table>
 +
 +
 +
====Video 20220513: How To Measure Square Tube with VTube-LASER and the HEXAGON Scan Arm====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to import square models, then measure, correct tube benders, and qualify square tube shapes using a HEXAGON scan arm and VTube-LASER.
 +
<td width=200>
 +
[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]
 +
</td>
 +
</tr>
 +
</table>
 +
 +
 +
====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.
 +
<td width=200>
 +
[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]
 +
</td>
 +
</tr>
 +
</table>
 +
 +
 +
====Video 20220331: Improved Best Fit For Shallow Bends====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.
 +
<td width=200>
 +
[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]
 +
* View [https://vimeo.com/694643426 Vimeo]
 +
</td>
 +
</tr>
 +
</table>
 +
 +
===Version 3.1===
 +
 +
====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to calculate tube elongation percentage with VTube-LASER.
 +
 +
<td width=200>
 +
[[image:20220113_Video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]
 +
* View [https://vimeo.com/665826780 Vimeo]
 +
* View [https://youtu.be/a0bc6IpbWb0  YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
 +
 +
====Video 20211207: VTube-LASER Correction for Han Jie Benders====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)
 +
 +
<td width=200>
 +
[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]
 +
* View [https://vimeo.com/654364120 Vimeo]
 +
* View [https://youtu.be/ym8LbFUpyow  YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
 +
===Version 3.0===
 +
 +
====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)
 +
 +
<td width=200>
 +
[[image:20210702_TangentPointEntryGrid.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]
 +
* View [https://vimeo.com/571874446 Vimeo]
 +
* View [https://youtu.be/C9yLbhoWlSE  YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
 +
====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)
 +
 +
<td width=200>
 +
[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]
 +
* View [https://vimeo.com/567104555 Vimeo]
 +
* View [https://youtu.be/RfWxFa6fEFk  YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20210505: How To Determine Positive and Negative Rotation Directions====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.
 +
 +
<td width=200>
 +
[[image:20210505_Positive_Rotation_Direction.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]
 +
* View [https://vimeo.com/545519786 Vimeo]
 +
* View [https://youtu.be/CL7L-rZbVDQ YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20210503: Automatic Reverse Calc====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.
 +
 +
<td width=200>
 +
[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]
 +
* View [https://vimeo.com/545518519 Vimeo]
 +
* View [https://youtu.be/-rh5eNA8tIA YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone shows the why and how of MTA.
 +
 +
<td width=200>
 +
[[image:20210421_MTAVideo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]
 +
* View [https://vimeo.com/541156704 Vimeo]
 +
* View [https://youtu.be/gGSAR-a6m3Q YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 202100413: VTube v3 NPS Values Tutorial====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone shows how to use the new NPS values in VTube.
 +
 +
<td width=200>
 +
[[image:20210413_NPSVideo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]
 +
* View [https://vimeo.com/536497747 Vimeo]
 +
* View [https://youtu.be/RcKawANCpWY YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 202100406: VTube-LASER Reverse Engineering Tutorial====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.
 +
 +
<td width=200>
 +
[[image:20210406_ReverseEngineeringVideo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]
 +
* View [https://vimeo.com/533692712 Vimeo]
 +
* View [https://youtu.be/7N_-0d_Mjp4 YouTube]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20210330: VTube-LASER to Transfluid Bender Communications====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how easy it is to communicate with Transfluid tProject bender software.
 +
 +
<td width=200>
 +
[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]
 +
* View [https://vimeo.com/531073455 Vimeo]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.
 +
 +
<td width=200>
 +
[[image:20210313_ImportMixedBenderData.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]
 +
* View [https://vimeo.com/523279713 Vimeo]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20210310: How to Import New Report Templates====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to import new report templates into VTube-STEP and VTube-LASER.
 +
 +
<td width=200>
 +
[[image:20210310_ImportReportTemplates.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]
 +
* View [https://vimeo.com/522027683 Vimeo]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.
 +
 +
<td width=200>
 +
[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]
 +
* View [https://vimeo.com/493550553 Vimeo]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.
 +
 +
<td width=200>
 +
[[image:20201111B_autocopydefaulttolerance.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]
 +
* View [https://vimeo.com/478271550 Vimeo]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.
 +
 +
<td width=200>
 +
[[image:20201111_precisionweightcontrolalignment.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]
 +
* View [https://vimeo.com/478127038 Vimeo]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.
 +
 +
<td width=200>
 +
[[image:20200930_measuring_od_end_profiles.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]
 +
* View [https://vimeo.com/463607514 Vimeo]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER. The same principle can be extended to holes in tube shapes.
 +
 +
<td width=200>
 +
[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]
 +
* View [https://vimeo.com/461988796 Vimeo]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.
 +
 +
<td width=200>
 +
[[image:20200722_RA7520_video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* Download [https://vimeo.com/440788274 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200709: Real-time Overall Scan Scores Build Confidence====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how VTube-LASER scan scoring system helps users know they are measuring well.
 +
 +
<td width=200>
 +
[[image:20200709_scanscore_video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to use Assembly to create multiple versions of the same part in one project.  Each version can then be used to measure the part at various stages of the fabrication process.
 +
 +
<td width=200>
 +
[[image:20200609_multiple_versions_parts_video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200515: How Import 180-degree Bend Models====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to import models with 180-degree bends.
 +
 +
<td width=200>
 +
[[image:20200515_import180_video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
====Video 20200514: How to Change Languages in VTube====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.
 +
 +
<td width=200>
 +
[[image:20200514_changelanguges_video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.
 +
 +
<td width=200>
 +
[[image:20200331_training_hexagon_video.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/402756704 Vimeo]
 +
* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200320: VTube UNIVERSITY Training Video: End Scans====
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.
 +
</td>
 +
<td width=200>
 +
[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/399358340 Vimeo]
 +
* View [https://youtu.be/qb9G15eQGpk YouTube]
 +
* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]
 +
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200309: Corrections with the OMCG Wire Bender====
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows a corrections loop between VTube-LASER and an OMCG wire bender.
 +
</td>
 +
<td width=200>
 +
[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://youtu.be/xFtyRToRwFY YouTube]
 +
* View [https://vimeo.com/396590418 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
You can manually setup the Ethernet port following the steps in this short video.
 +
</td>
 +
<td width=200>
 +
[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
Switching from probe to laser is easy with the three-way toggle button.
 +
 +
(Using a HEXAGON RA8 ScanArm)
 +
</td>
 +
<td width=200>
 +
[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/389798661 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
===Version 2.9.21===
 +
 +
 +
====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. 
 +
 +
(Using a HEXAGON 8325 ScanArm)
 +
</td>
 +
<td width=200>
 +
[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/384896663 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
 +
====Video 107: Corrections Loop with SOCO Beckhoff Controls====
 +
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.
 +
</td>
 +
<td width=200>
 +
[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/356003359 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
===Version 2.9.19===
 +
 +
====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====
 +
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.
 +
</td>
 +
<td width=200>
 +
[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.vimeo.com/332490313 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====
 +
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.
 +
</td>
 +
<td width=200>
 +
[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.vimeo.com/332124282 Vimeo]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
===Version 2.9.18===
 +
 +
====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====
 +
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.
 +
</td>
 +
<td width=200>
 +
[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====
 +
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.
 +
</td>
 +
<td width=200>
 +
[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/320630910 Vimeo]
 +
* View [https://youtu.be/Qpn8Iyl_RwU YouTube]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 98: About the Small Diameter Warning  ====
 +
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
This video shows how Small Diameter Warning works along with its setup.
 +
</td>
 +
<td width=200>
 +
[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/320355578 Vimeo]
 +
* View [https://youtu.be/uT_PN-lNsz8 YouTube]
 +
* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
====Video 96: VTube-STEP and VTube-LASER New Radius Features ====
 +
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
See the new radius features in this video. In Part Setup:
 +
* Renamed "Radius 1" (renamed from Default Radius)
 +
* New "Radius 2" field
 +
* New "Radius 3" field
 +
<br>
 +
In Parametric Tube grid windows:<br>
 +
* See how to quickly set the radii for all bends using the synchronize radius feature.
 +
 +
</td>
 +
<td width=200>
 +
[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/317137310 Vimeo]
 +
* View [https://youtu.be/DN_bhnMWCPI YouTube]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====
 +
 +
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
</td>
 +
<td width=200>
 +
[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/315983373 Vimeo]
 +
* View [https://youtu.be/RLCXQt34Alw YouTube]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
===Version 2.9.17===
 +
 +
 +
====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====
 +
 +
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30,  2018).
 +
 +
<table width=700>
 +
<tr>
 +
<td width=300>
 +
</td>
 +
<td width=200>
 +
[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br>
 +
</td>
 +
<td width=300>
 +
* View [https://vimeo.com/309191006 Vimeo]
 +
* View [https://youtu.be/kRwrjV9AqZA YouTube]
 +
* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
  
 
===Version 2.9.16===
 
===Version 2.9.16===
  
−
====Video 86: How to Attach and Use the ROMER Absolute v8 Scanner in VTube-LASER ====
+
====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====
  
−
This is a short introduction into how to attach and use the 8-series arm scanner.
+
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.
 
<table width=700>
 
<table width=700>
 
<tr>
 
<tr>
Line 30: Line 902:
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>
−
* View [https://vimeo.com/278343562 Vimeo]
+
* View [https://vimeo.com/298226309 Vimeo]
−
* View [https://youtu.be/lAmLVzMHatw YouTube]
+
* View [https://youtu.be/GQnAAGLJ-Sc YouTube]
 
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]
 
* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]
 
</td>
 
</td>
Line 38: Line 910:
 
</table>
 
</table>
 
<br><br>
 
<br><br>
−
 
−
 
  
 
===Version 2.9.10===
 
===Version 2.9.10===

Latest revision as of 20:16, 24 February 2023

See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page.

VTube-LASER Videos HEXAGON ROMER.png





Version 4

Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations

Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.

Vtl v4 ProperEndStraightScanningForGoodEndPoints.png

Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects

This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.

Vtl v4 DCPTutorial.png

Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4

This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.

Vtl v4 ShallowBendVideo v2c.png

Version 3.2

Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER

This video shows set up VTube-LASER to correct SMI benders.

Vtl v3.2 SMIBenderCorrectionVideo.png


Video 20220513: How To Measure Square Tube with VTube-LASER and the HEXAGON Scan Arm

This video shows how to import square models, then measure, correct tube benders, and qualify square tube shapes using a HEXAGON scan arm and VTube-LASER.

Vtl v3.2b755 SquareTubeVideo Hexagon.png


Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications

This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.

Vtl v3.2b750 CNCBenderBenderlinkVideo.png


Video 20220331: Improved Best Fit For Shallow Bends

This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.

Vtl v3.2b714 BestFitShallowBend.png

Version 3.1

Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage

This video shows how to calculate tube elongation percentage with VTube-LASER.

20220113 Video.png


Video 20211207: VTube-LASER Correction for Han Jie Benders

This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)

20211207 VTube-LASER to HanJie Video.png

Version 3.0

Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube

Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)

20210702 TangentPointEntryGrid.png

Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER

Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)

20210622 End Scan Flier Filter Promo.png



Video 20210505: How To Determine Positive and Negative Rotation Directions

Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.

20210505 Positive Rotation Direction.png



Video 20210503: Automatic Reverse Calc

Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.

20210503 AutomaticReverseCalcVideo.png




Video 20210421: Why and How to Use MTA (Measured Tube Averaging)

Michael Cone shows the why and how of MTA.

20210421 MTAVideo.png



Video 202100413: VTube v3 NPS Values Tutorial

Michael Cone shows how to use the new NPS values in VTube.

20210413 NPSVideo.png



Video 202100406: VTube-LASER Reverse Engineering Tutorial

Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.

20210406 ReverseEngineeringVideo.png



Video 20210330: VTube-LASER to Transfluid Bender Communications

This video shows how easy it is to communicate with Transfluid tProject bender software.

20210330 TransfluidTProjectCommunications.png



Video 20210313: How to Enter Bender Data of Different Types in the Same Project

This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.

20210313 ImportMixedBenderData.png



Video 20210310: How to Import New Report Templates

This video shows how to import new report templates into VTube-STEP and VTube-LASER.

20210310 ImportReportTemplates.png




Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)

See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.

20201221 UTESelectCorrectionVideo.png



Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights

Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.

20201111B autocopydefaulttolerance.png



Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges

Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.

20201111 precisionweightcontrolalignment.png




Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)

This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.

20200930 measuring od end profiles.png




Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)

This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER. The same principle can be extended to holes in tube shapes.

20200923 measureing tubes with ports hexagon.png



Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm

This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.

20200722 RA7520 video.png



Video 20200709: Real-time Overall Scan Scores Build Confidence

This video shows how VTube-LASER scan scoring system helps users know they are measuring well.

20200709 scanscore video.png



Video 20200609: How to Use Multiple Versions of the Same Part in One Project

This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.

20200609 multiple versions parts video.png



Video 20200515: How Import 180-degree Bend Models

This video shows how to import models with 180-degree bends.

20200515 import180 video.png




Video 20200514: How to Change Languages in VTube

This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.

20200514 changelanguges video.png



Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar

This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.

20200331 training hexagon video.png



Video 20200320: VTube UNIVERSITY Training Video: End Scans

This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.

Vtl v3.0 training endscan technique.png



Video 20200309: Corrections with the OMCG Wire Bender

This video shows a corrections loop between VTube-LASER and an OMCG wire bender.

Vtl v3.0 correct OMCG.mp4.png



Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection

You can manually setup the Ethernet port following the steps in this short video.

Vtl v3.0 setupethnernetHEXAGON.mp4.png



Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms

Switching from probe to laser is easy with the three-way toggle button.

(Using a HEXAGON RA8 ScanArm)

Vtl v3.0 switchingprobesHEXAGON.mp4.png



Version 2.9.21

Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles

See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE.

(Using a HEXAGON 8325 ScanArm)

Vtubelaser v2.9.21.video corner profiles 002.png




Video 107: Corrections Loop with SOCO Beckhoff Controls

This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.

Vtubelaser v2.9.21.video soco beckhoff communications.png



Version 2.9.19

Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square

This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.

Vtubestep v2.9.19.video different tube types scanned.png



Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half

This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.

Vtubestep v2.9.19.video timer accept button.png



Version 2.9.18

Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend

This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.

Vtubestep v2.9.18.video calculate true radius 180-degree.png




Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm

This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.

Vtubestep v2.9.18.video reverse RZR side by side.png



Video 98: About the Small Diameter Warning

This video shows how Small Diameter Warning works along with its setup.

Vtubestep v2.9.18.video small diameter warning.png




Video 96: VTube-STEP and VTube-LASER New Radius Features

See the new radius features in this video. In Part Setup:

  • Renamed "Radius 1" (renamed from Default Radius)
  • New "Radius 2" field
  • New "Radius 3" field


In Parametric Tube grid windows:

  • See how to quickly set the radii for all bends using the synchronize radius feature.

Vtube v2.9.18.video newradius features.png



Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer

Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.

Vtl v2.9.18.video RbSABendPro demo.png



Version 2.9.17

Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM

Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).

Vtl v2.9.17.video newfeatures hexagon demo.png



Version 2.9.16

Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER

This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.

Vtl v2.9.16. attach and use RA8 scanner.png



Version 2.9.10

Video 86: VTube-LASER's LASER SCAN FILTER SOUND

This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.

Vtl v2.9.10. laserscanfilter sound.png



Video 84: Measuring Convoluted Tube and Wire with VTube-LASER

This video shows VTube-LASER's ability to measure extremely convoluted parts with a ROMER Absolute Arm with Integrated Scanner. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.

Vtl 2.9.10 convoluted tube and wire video.png


Version 2.9.4

Video 78: VTube-LASER Corrects an SMT Bender Using a ROMER Absolute Arm

This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.

Vtube-laser v2.9.4 smtcorrection video.png


Version 2

Video 2: SCANNING SPEED TEST ON TWO TYPES OF TUBES

This video shows speed tests on two very different kinds of tube shapes:

  1. An Exhaust Pipe

  2. A copper HVAC tube with two 180-degree bends

Vtube-laser v2.9.2 romer speed test video.png


Video 1: INTRODUCING VTUBE-LASER MEASURING WITH A ROMER ABSOLUTE ARM

As of November 1, 2017, VTube-LASER can measure tubes with ROMER Absolute Arms from HEXAGON. This video shows a measurement of a tube using a 3.5 meter ROMER arm.

Vtube-laser v2.9 First ROMER video.png


Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_Videos_for_HEXAGON_ROMER&oldid=43568"