Difference between revisions of "Surface Spray"

Latest revision as of 16:21, 18 January 2022

Removable surface sprays are helpful for coating surfaces that are highly reflective or very black. Then can also aid in marking the area to measure.

<

Very thin coating
Designed for laser scanning
Cleans with a dry rag.
Is not as dense as Magnaflux or Dynaflux. The goal of the spray is to break the reflectivity - for which a complete coverage is not necessary.
$300 per case of 12 cans (January 2021)
See 3DScanSpray.com

Magnaflux Spotcheck SKD-S2 Developer

Dynaflux DF315-16 Crack Check D-F Developer

Works well
DF315-16 Flammable Nuclear grade uses non-chlorinated solvent
DNF315-16 Non-flammable Standard grade
Very inexpensive ($5 per can)
For applications that require cleaning, the corresponding cleaner uses the same Dynaflux part number.
May cause an allergic reaction in the skin of some operators

@@ Line 25: / Line 25: @@
 * Designed for laser scanning
 * Vanishing (evaporates over time) - no cleaning required
-* $240 per case of 6 cans (January 2022)
+* $240 per case of 6 cans (January 2022, Amazon)
 * See [https://aesub.com/en/products/ aesub.com]
 </td>
@@ Line 46: / Line 46: @@
 </td>
 <td width=300>
-[[image:helling spray.png]]
+[[image:helling spray.png|250px]]
-</td>
-</tr>
-</table>
-==Foot Spray==
-<table cellpadding=10>
-<tr valign=top>
-<td width=300>
-* Works less well than other sprays
-* Inexpensive
-* Does not cause an allergic reaction like the flux types below.
-* Much less messy than alcohol and powder.
-* Cleaning with a wipe is easy.
-* Is not as dense as Magnaflux or Dynaflux.  Thick coating is not necessary.  The goal of the spray is to break the reflectivity - for which a complete covering is not necessary.
-* Not the best odor - smells like foot spray, which may be a problem for some users.
-</td>
-<td width=300>
-[[image:goldbond_footspray.jpg]][[image:tinactin.jpg|100px]]
 </td>
 </tr>