Difference between revisions of "Autobuild"

Latest revision as of 16:24, 17 February 2023

The files used in this demonstration are .stp files.

STEP 1 Import a 3D model
STEP 2 Under Parametric Data, choose Autobuild Cylindrical.
STEP 3 The XYZ and LRA grid will now have parametric data in them. This information can be sent to a bender, or brought into VTube-LASER to be measured against.
Other Pages Back to the VTube-STEP page

@@ Line 12: / Line 12: @@
 __NOTOC__
-== This document shows the process of importing a STEP file into VTube-STEP==
+== This document shows the process of using Autobuild to gather parametric data from a 3D model into VTube-STEP==
-The files used are .stp files. <br><br>
+The files used in this demonstration are .stp files. <br><br>
 == Steps to import a .stp file into VTube-STEP==
@@ Line 45: / Line 45: @@
 ===STEP 3===
-Load the desired part into VTube-STEP from the file it is saved in inside file explorer
-</td>
-<td>
-[[image:vtube_v4demo6.png|600px]]
-</td>
-</tr>
-<tr>
-<td width=300>
-===STEP 4===
-To collect parametric data, an operator can either autobuild or manually collect features.
-For Autobuild
-For Manual Collection
-</td>
-<td>
-[[image:vtube_v4autobuild.png|600px]]
-[[image:vtube_v4manual.png|600px]]
-</td>
-</tr>
-</table>
-<br>
-<table>
-<tr>
-<td width=300>
-===STEP 5===
-* Rebuild Parametric Tube from Collected if manual collection was used<td>
-[[image:Vtube-STEP_v4rebuild.png|600px]]
-</td>
-</tr>
-<tr>
-<td width=300>
-===STEP 6===
 The XYZ and LRA grid will now have parametric data in them. This information can be sent to a bender, or brought into VTube-LASER to be measured against.</td>
 <td>