Difference between revisions of "CNC Bender v11-20081009"

From ATTWiki
Jump to: navigation, search
(→‎25px REVISED - PD BOOST Changed to PD ASSIST)
(→‎25px ENHANCED- Various Changes)
 
(9 intermediate revisions by one user not shown)
Line 32: Line 32:
  
  
−
===[[image:Check.jpg|25px]] NEW - XYZ REVERSE ===
+
===[[image:Check.jpg|25px]] MICELLANEOUS Changes ===
  
−
A new Reverse XYZ feature allows you to reverse the XYZ data on the screen.<br><br>
+
[[image:cncbender_autoadjust_bendangle_tab.jpg|300px|right]]
−
[[image:cncbender_reverse_xyz.jpg|500px]]
+
−
<br><br>
+
  
−
=CHANGES to CNC PROCESSOR=
+
* Reset the part name to empty and the parts path to the programed parts path after saving the default configuration file in the Low Level menu.
  
−
===[[image:Check.jpg|25px]] Repair To Inline Edge Trigger Logic  ===
+
* The default tab in the Bender Options - Auto Adjust page is now set to "Bend Angle"
  
−
A logic problem with the [[Edge Trigger]] conditional inline handling introduced in the previous version is repaired and enhanced.
+
* For programmable pressures on a PDA axis, the PDA Pressure is now set just before a jog is processed.
−
<br><br>
+
−
Updating to this version from the previous version is important to solve issues with the pressure die boost return input and the run button inputs.<br><br>
+
−
<br>
+
−
<br>
+
  
−
===[[image:Check.jpg|25px]] NEW - Run Button Anti-Tie-Down Logic Always Handled Internally by CNC Processor  ===
 
  
−
[[image:Cncbender_runbutton_left.jpg|200px|left]]
 
  
−
[[Edge Trigger]] logic is used to require a button to be released then pressed before it is considered activated.  This is usually applied where it is unsafe to allow a button to be continuously pressed (without release) for machine operation.
 
 
<br><br>
 
<br><br>
−
Run button inputs require special handling with [[Edge Trigger]] logic, so if [[Edge Trigger]] logic is enabled for either the left or right run button inputs, then CNC Processor ignores the "require edge trigger" setting for those two inputs so that the anti-tie down logic is handled internally.<br><br>
 
−
 
−
If the "require edge trigger" is set to ON in either of these inputs in the CIO dictionary, then Processor will report in the log when CNC Bender is loaded.  The message displayed in the log will be:
 
−
 
−
<pre>Run Button Edge Triggers Are Switched OFF - Handling Internally in CNC Processor</pre>
 
−
 
−
 
−
<br>
 
−
<br>
 
  
 
=Other Pages=
 
=Other Pages=

Latest revision as of 02:12, 10 October 2008

Cncbender logo pushbending.png

Operatorstation model.jpg



CHANGES to CNC BENDER

Check.jpg NEW - Recent Parts List

Operators asked us to include a recent part file list in the CNC Bender File Load menu. So the feature has been added in this version.

Cncbender recentpartlist.jpg

The list is placed at the top of the file load menu and tracks the last 20 unique part names loaded into CNC Bender. To use the list:

  1. Pull down the list using the down arrow
  2. Select the part to reload
  3. The part will be searched for and selected in the parts list (if it is still in the list)
  4. Press Load



Cncbender recentpartlist select.jpg


Check.jpg REVISED - PD BOOST Changed to PD ASSIST

We've changed the wording of the PD BOOST to PD ASSIST in CNC Bender to more accurately reflect what the feature is in CNC Bender.

Cncbender pda assist options.jpg


Check.jpg MICELLANEOUS Changes

Cncbender autoadjust bendangle tab.jpg
  • Reset the part name to empty and the parts path to the programed parts path after saving the default configuration file in the Low Level menu.
  • The default tab in the Bender Options - Auto Adjust page is now set to "Bend Angle"
  • For programmable pressures on a PDA axis, the PDA Pressure is now set just before a jog is processed.




Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=CNC_Bender_v11-20081009&oldid=8584"