Difference between revisions of "Modicon Momentum"

From ATTWiki
Jump to: navigation, search
(INPUT Base with Ethernet Communication Adapter)
Line 1: Line 1:
[[image:Momemtum_modicon.jpg]]<br>
+
[[image:tsxmomentum_ethernet_communications_adapter1.jpg|300px]]<br>
  
 
This the form of the modules that are installed to SMT CNC Bender.  For example, the I/O module is shown above.
 
This the form of the modules that are installed to SMT CNC Bender.  For example, the I/O module is shown above.

Revision as of 12:24, 23 December 2009

Tsxmomentum ethernet communications adapter1.jpg

This the form of the modules that are installed to SMT CNC Bender. For example, the I/O module is shown above.

See this data sheet (16 pages) for an overview of these modules.

View the Modicon Momentum I/O Base User Guide (662 pages).

They mount to DIN rails in electrical panels.

This is the form for the I2T servo modules

Momentum.jpg

In the I2T servo modules, the serial port is an RJ-45 receptacle port shown in this image.

Momentum serial port.jpg


INPUT Base with Ethernet Communication Adapter

This is an Ethernet Communications Adapter on top of a 32-point INPUT base.

Tsxmomentum ethernet communications adapter2.jpg

BACK of Modicon Momentum I/O Base

This is the back of the base.

Tsxmomentum back.jpg

Other Pages