Difference between revisions of "Modicon Momentum"
From ATTWiki
| Line 1: | Line 1: | ||
[[image:tsxmomentum_ethernet_communications_adapter1.jpg|300px]]<br> | [[image:tsxmomentum_ethernet_communications_adapter1.jpg|300px]]<br> | ||
| − | This the form of the modules that are installed to | + | This the form of the modules that are installed to machines that use our CNC Bender software. The different modules come in a variety of functions - but the same packaging. For example, the image above shows an INPUT base with 32-points with an Ethernet Communications Adapter clipped on the top. |
See this [http://www.advancedtubular.com/cncbender/Momentum__BROC_EN_200401.pdf data sheet] (16 pages) for an overview of these modules. | See this [http://www.advancedtubular.com/cncbender/Momentum__BROC_EN_200401.pdf data sheet] (16 pages) for an overview of these modules. | ||
Revision as of 12:26, 23 December 2009
This the form of the modules that are installed to machines that use our CNC Bender software. The different modules come in a variety of functions - but the same packaging. For example, the image above shows an INPUT base with 32-points with an Ethernet Communications Adapter clipped on the top.
See this data sheet (16 pages) for an overview of these modules.
View the Modicon Momentum I/O Base User Guide (662 pages).
They mount to DIN rails in electrical panels.
|
This is the form for the I2T servo modules |
|
|
In the I2T servo modules, the serial port is an RJ-45 receptacle port shown in this image. |
|
INPUT Base with Ethernet Communication Adapter
This is an Ethernet Communications Adapter on top of a 32-point INPUT base.
BACK of Modicon Momentum I/O Base
This is the back of the base.
Other Pages
- Back to CNC Bender page
- Back to CNC Bender General Information page
- Back to CNC Bender Technical Notes page
