Difference between revisions of "Jog Motion"

Revision as of 20:02, 18 January 2010

A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.

Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

You can even rename the Jog Motion name (or translate the motion to another language).

Three Jog Motions in a Custom Command

@@ Line 17: / Line 17: @@
 <td width=250>
-[[image:cncb12frb_customcommands.jpg|300px|thumb|Screen 1: Select one of the Edit Custom buttons a bend in the FRB page]]
+[[image:cncv12_jogmotions.jpg|300px|thumb|Three Jog Motions in a Custom Command]]
-[[image:cncv12_customcommands_list.jpg|300px|thumb|Screen 2: Custom Commands List Selection]]<br><br>
-[[image:cncv12_customcommand_editor.jpg|300px|thumb|Screen 3: Custom Command Editor]]
 </td>
 </tr>