Difference between revisions of "Jog Motion"

From ATTWiki
Jump to: navigation, search
Line 18: Line 18:
 
<td width=400>
 
<td width=400>
 
[[image:cncv12_jogmotions.jpg|400px|thumb|Three Jog Motions in a Custom Command - All three run at the same time.]]
 
[[image:cncv12_jogmotions.jpg|400px|thumb|Three Jog Motions in a Custom Command - All three run at the same time.]]
 +
[[image:cncv12_selectjogmotion.jpg|400px|thumb|Select a Jog Motion from the Selection menu]]
 +
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 20:09, 18 January 2010

  • A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender.

  • Jog Motions can be entered using a keyboard, or entered using Teach Mode

  • Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

  • The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

  • You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

  • You can even rename the Jog Motion name (or translate the motion to another language).
Three Jog Motions in a Custom Command - All three run at the same time.
Select a Jog Motion from the Selection menu




Retrieved from "http://www.advancedtubular.wiki/index.php?title=Jog_Motion&oldid=13364"