Difference between revisions of "Jog Motion"

Revision as of 20:13, 18 January 2010

A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender. (Screen 1 shows a Custom Command with Jog Motions)

Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 2)

Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

You can even rename the Jog Motion name (or translate the motion to another language).

Screen 1: Three Jog Motions in a Custom Command - All three run at the same time.

Screen 2: Select a Jog Motion from the Selection menu

@@ Line 2: / Line 2: @@
 <tr valign=top>
 <td width=300>
-* A Jog Motion is a motion for a single axis or actuator that is stored in a [[Custom Command]] for use by [[Teach Mode]] if you choose to teach the bender.<br><br>
+* A Jog Motion is a motion for a single axis or actuator that is stored in a [[Custom Command]] for use by [[Teach Mode]] if you choose to teach the bender.  (Screen 1 shows a Custom Command with Jog Motions)<br><br>
-* Jog Motions are selected from the Jog Motion Selection menu (See Screen 2)<br><br>
+* Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 2)<br><br>
 * Jog Motion values can be entered using a keyboard, or entered using [[Teach Mode]]<br><br>