Difference between revisions of "Jog Motion"

• A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender. (See Screen 1)
  
  

• Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 2)
  
  

• Jog Motion values can be entered using a keyboard, or entered using Teach Mode
  
  

• Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.
  
  

• The existence of a Jog Motion in the CNC Bender user interface is completely configurable.
  
  

• You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.
  
  

• You can even rename the Jog Motion name (or translate the motion to another language).
  
  

Screen 1: Three Jog Motions in a Custom Command - All three run at the same time.

Screen 2: Select a Jog Motion from the Selection menu

[[image:cncv12_customcommand_empty.jpg|300px|thumb|Screen 3: An empty Custom Command (no Jog Motions present)