Difference between revisions of "Jog Motion"

From ATTWiki
Jump to: navigation, search
(→‎Jog Motion Configuration)
(→‎Jog Motion Configuration)
Line 32: Line 32:
  
  
−
==Jog Motion Configuration==
+
==Jog Motion System Configuration==
  
 
<table>
 
<table>
Line 47: Line 47:
 
</tr>
 
</tr>
 
</table>
 
</table>
 +
 +
 +
 +
<br><br>
 +
 +
=Other Pages=
 +
*Back to [[CNC Bender]]
 +
*Back to [[CNC Bender Software Updates]]
 +
*See [[CNC Bender General Information]]
 +
*See [[Teach Mode]]
 +
*See [[Custom Command]]s
 +
*See upgrade [[CNC Bender v12-20100105]]

Revision as of 20:32, 18 January 2010

  • A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender. (See Screen 1)

  • Custom Commands begin without any Jog Motions (See Screen 2) Add a Jog Motion using the Add a jog motion button

  • Now the Jog Motion exists, but it is unassigned or empty. Click on the Jog Motion name cell to select a Jog Motion. (See Screen 3)

  • Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 4)

  • Jog Motion values can be entered using a keyboard, or entered using Teach Mode

  • Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

Screen 4: Select a Jog Motion from the Selection menu
Screen 1: Three Jog Motions in a Custom Command - All three run at the same time.
Screen 2: An empty Custom Command (no Jog Motions present)
Screen 3: Click on an unassigned (empty) Jog Motion cell to select a Jog Motion




Jog Motion System Configuration

  • The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

  • You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

  • You can even rename the Jog Motion name (or translate the motion to another language).




Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Jog_Motion&oldid=13381"