Revision as of 13:07, 16 March 2010

Type of Upgrade: Feature Upgrade

New Bend option added

This new bend option allows you to fine-tune the calculated feed speed during Feed Bending.
Value Type:	The value is entered as a floating point percentage.
+ or -:	The value can be positive or negative.
Impact of Negative Values:	Negative values slow the calculated speed of the Feed axis.
Example +:	A value of +100 would double the speed of the Feed axis during draw bending.
Example -:	A value of -100 would set the speed at 0 for the Feed axis during draw bending.
The table at the right shows an example of a -10% change in the processlist:	See vel0 calculated at 100%: See the same velocity with the option set to -10 (which represents 90% speed):

@@ Line 37: / Line 37: @@
 </tr>
-<tr><td>Value Type:</td><td>The value is entered as a floating point percentage.</td></tr>
+<tr><td>'''Value Type:'''</td><td>The value is entered as a floating point percentage.</td></tr>
-<tr><td>+ or -:</td><td>The value can be positive or negative.</td></tr>
+<tr><td>'''+ or -:'''</td><td>The value can be positive or negative.</td></tr>
-<tr><td>Impact of Negative Values:</td><td>Negative values slow the calculated speed of the Feed axis.</td></tr>
+<tr><td>'''Impact of Negative Values:'''</td><td>Negative values slow the calculated speed of the Feed axis.</td></tr>
-<tr><td>Example +:</td><td>A value of +100 would double the speed of the Feed axis during draw bending.</td></tr>
+<tr><td>'''Example +:'''</td><td>A value of +100 would double the speed of the Feed axis during draw bending.</td></tr>
-<tr><td>Example -:</td><td>A value of -100 would set the speed at 0 for the Feed axis during draw bending.</td></tr>
+<tr><td>'''Example -:'''</td><td>A value of -100 would set the speed at 0 for the Feed axis during draw bending.</td></tr>
 <tr valign=top>

Difference between revisions of "CNC Bender v12-20100316"