Difference between revisions of "Principles of CNC Bender Data Transfer"

Revision as of 15:06, 18 June 2010 (view source) Mcone (Talk | contribs) (→‎Use Supravision Data to Transfer the Master Data) ← Older edit		Revision as of 15:07, 18 June 2010 (view source) Mcone (Talk | contribs) (→‎Use Supravision Data to Transfer the Master Data) Newer edit →
Line 7:		Line 7:
	<table>		<table>
		+
	<tr>		<tr>
	<td>		<td>

---

Revision as of 15:07, 18 June 2010

This describes basic principles for bender data transfer to CNC Bender.

Use Supravision Data to Transfer the Master Data

CNC Bender can import Supravision data files that contain the XYZ master data for setup of a new part.

</td> <td> </td> <tr> <td> In CNC Bender, go to the Tube Shape menu/XYZ tab and press the SVin button. </td> </td> <td>
</td> </tr> <tr> <td> Import the centerline data into the XYZ page.</td> </td> <td> </td> </tr> <tr> <td> Press the Calc FRB button to build the bender data in the FRB tab menu </td> <td> </td> </tr> </table>

Create the SV data file using a software package like Supravision, TubeCalc, TubeCAD, VTube-STEP or one of the Benderlink packages. If you use measuring center software like Supravision or DOCS.
Save the file to the c:\cnc\svparts folder in CNC Bender operator station (use a thumb drive or make a direct network connection)