Difference between revisions of "Restart the HASP Service"

Revision as of 18:00, 25 January 2011

Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver:

Remove the HASP hardware key(s) from the USB port(s) on the computer.
From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory.
Reboot the computer.
From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again.

Revision as of 18:00, 25 January 2011 (view source) Mcone (Talk \| contribs) ← Older edit		Revision as of 18:00, 25 January 2011 (view source) Mcone (Talk \| contribs) (→‎Other) Newer edit →
Line 8:		Line 8:

	==Other==		==Other==
−	*Back to "Hardware key"	+	*Back to [[Hardware key]]