Difference between revisions of "Restart the HASP Service"
From ATTWiki
| Line 21: | Line 21: | ||
<table cellpadding=10> | <table cellpadding=10> | ||
<tr> | <tr> | ||
| − | <td width= | + | <td width=300> |
'''STEP 1''' - Remove the HASP hardware key(s) from the USB port(s) on the computer. | '''STEP 1''' - Remove the HASP hardware key(s) from the USB port(s) on the computer. | ||
</td> | </td> | ||
Revision as of 18:13, 25 January 2011
|
Using the hasp command-line interface, you can run haspdinst.exe to stop and reinstall the hasp driver: |
|
|
Go to the Utility Software page and download the HASP Command Line Hardware Key Driver. The haspdinst.exe software is zipped in this download. |
|
STEP 1 - Remove the HASP hardware key(s) from the USB port(s) on the computer. |
|
|
STEP 2 - From a command box, type "haspdinst -fr -kp -purge", and press Enter. This will "force remove", "kill process", and "purge" the process from memory. |
haspdinst -fr -kp -purge |
|
STEP 3 - Reboot the computer. |
|
|
STEP 4 - From a command box, type "haspdinst -kp -i" and press Enter. This will "kill process" and "install" the driver again. |
haspdinst -kp -i |
Other
- Back to Hardware key
