Difference between revisions of "End-Scan Using the End Wall"
From ATTWiki
(→Other Pages) |
(→Why the End-Scan technique is important) |
||
| Line 23: | Line 23: | ||
We recommend this for increased precision where high-reflectivity and burrs are not an issue on the end wall of the tube. | We recommend this for increased precision where high-reflectivity and burrs are not an issue on the end wall of the tube. | ||
<br><br> | <br><br> | ||
| − | + | For tube walls with high-reflectivity and burrs, we recommend the most precise [[End-Scan Using End Targets]]. | |
</td> | </td> | ||
<td width=300> | <td width=300> | ||
Revision as of 23:18, 28 January 2012
|
|
|
Why the End-Scan technique is important
|
This end-scan method is useful for increase in precision over the scissor method.
|
How To Use This End-Scan Technique
The advantage of this method is that it is easy to use. The disadvantage is that it is more prone to outlier points from the inner diameter surface. |
|
Another Way to Use This End-Scan Technique
The advantage of this method is that it is less prone to outlier points. The disadvantage is that it is hard to aim at thinner walls. |
|
Other Pages
- See also End-Scan Using the Scissor Motion
- See also End-Scan Using End Targets
- Back to VTube-LASER
