Difference between revisions of "Use Bend Count For Machine Lube"
From ATTWiki
| Line 1: | Line 1: | ||
| + | ''As of v1020070711 (July 11, 2007), this property is obsolete and no longer available.'' | ||
| + | |||
__toc__ | __toc__ | ||
| + | |||
| + | |||
===What is It?=== | ===What is It?=== | ||
Latest revision as of 01:14, 13 July 2007
As of v1020070711 (July 11, 2007), this property is obsolete and no longer available.
Contents |
What is It?
This property is a switch that instructs CNC Processor to use the bend count rather than the part count for machine lube start event.
Value
The value is set to 0 or 1 like this:
Use Bend Count For Machine Lube= 0
or
Use Bend Count For Machine Lube= 1
If the value is set to 1, then it is activated, and Lube Machine At Bend Count property will be used to set the event for the machine lube.
If the value is set to 0, then it is deactivated, and Lube Machine At Part Count property will be used to set the event for the machine lube.
--Mcone 23:40, 19 July 2006 (EDT)
