Difference between revisions of "TS-2000"
(→COMMUNICATIONS) |
|||
| Line 14: | Line 14: | ||
The TS-2000 software allows for communication using the [[Supravision]] [[SVNET]] protocol. This is a purchased option for the control (not all TS-2000 controls have this option enabled). Communications are straight-forward, efficient, and very fast. | The TS-2000 software allows for communication using the [[Supravision]] [[SVNET]] protocol. This is a purchased option for the control (not all TS-2000 controls have this option enabled). Communications are straight-forward, efficient, and very fast. | ||
| − | The TS-2000 can also be setup to communicate with | + | The TS-2000 can also be setup to communicate with a FARO running our [[VTube-LASER]] software and [[FARO CAM2]] software using our [[Benderlink for FARO]] software. |
Revision as of 13:27, 20 March 2013
Contents |
The TS-2000 control is a Windows-based control that was designed by Tom Glissman. TS-2000 controls were initially based on the Windows NT platform. They are now shipped with the Windows XP platform.
COMMUNICATIONS
The TS-2000 software allows for communication using the Supravision SVNET protocol. This is a purchased option for the control (not all TS-2000 controls have this option enabled). Communications are straight-forward, efficient, and very fast.
The TS-2000 can also be setup to communicate with a FARO running our VTube-LASER software and FARO CAM2 software using our Benderlink for FARO software.
HOW TO CHECK for COMMUNICATIONS ENABLE
The Supravision link is sold by PINES as an option. It's important to verify that this option is switched on when discovering if a TS-2000 is ready for communication. The main window contains 16 touchscreen buttons starting with XYZ in the upper left. If the upper-right button reads "Supravision Link", then the option is enabled on that TS-2000 control. If the button says "External Link", then communications is not activated.
What Pines Technology will Need to Activate Communications
Pines Technology will need to send you a setup program to enable communications. They will ask for this information:
- Machine Serial Number
- Software Version Number
You can find both of these values in the caption of the TS-2000 software. The software version will be a four digit number like 2.8.6.7 or 3.1.0.2.
