Difference between revisions of "VTube-LASER v1.86"
(→Revision 1.85.1) |
(→25px Other Changes) |
||
Line 153: | Line 153: | ||
<tr valign=top> | <tr valign=top> | ||
<td width=400> | <td width=400> | ||
− | * | + | * Changes were made to the interface to clear up the potential for orphaned windows in the Dell M6700 laptops. For example, when the LASER mode window is displayed, then the STEP mode window disappears.<br><br> |
− | + | ||
Revision as of 21:19, 18 January 2014
Revision 1.86
|
- See VTube-LASER Customer Support Page to download the latest version.
ENHANCED: Added PLUS and MINUS tolerances for End Lengths
|
ENHANCED: SolidWorks Builder - End Offsets Added
The SolidWorks tube builder can now:
|
FIXED: Memory Leaks
A few heavy-use customers were reporting that the Alignment feature, if used for hours repeatedly, would eventually cause a lock to the software. We discovered that VTube would eventually run out of Windows memory if used for extended periods of time because several additional megabytes of memory was used but never released during each alignment.
This fix can be proved by running the Task Manager Performance menu, and viewing the "Available" memory value during an alignment. |
ENHANCED: Repaired and Improved Benderlink Setup Menu
We discovered issues with the Benderlink Setup menu, where edited data was not always stored after it was changed in the grid. This has been repaired. All data entered is saved.
|
ENHANCED: Improved System Options Menu
The System Options menu is changed:
|
NEW: Export Dialog Windows With Configurable Paths
|
Other Changes
|
Other
- Back to VTube-STEP
- Back to VTube Software Updates (for LASER Mode)
- Back to VTube-LASER
- See VTube Language Editor