Difference between revisions of "Overbend Calculator"
From ATTWiki
(→Three Step Process for Predicting Springback) |
|||
| Line 30: | Line 30: | ||
<br><br> | <br><br> | ||
| + | |||
| + | ==VTube-STEP and VTube-LASER== | ||
| + | |||
| + | The fixed and proportional springback values are included in the Part Setup menu - and have an effect on sending especially new data to the bender. Because of this, the Overbend Calculator is embedded in VTube-STEP and VTube-LASER. To access the calculator inside VTube, follow these steps: | ||
| + | |||
| + | *STEP 1: Right click anywhere in the white column in the Part Setup menu. | ||
| + | |||
| + | *STEP 2: Choose Overbend Calculator in the context menu (the popup menu). | ||
| + | |||
| + | *STEP 3: Make a part with two test bends. Typically they are 20 and 120 degrees. The bender is set to bend these angles and a test tube is bent. | ||
| + | |||
| + | *STEP 4: The actual resulting bend angles are measured and entered into the overbend calculator. | ||
| + | |||
| + | *STEP 5: Formula constant values are calculated and used in a springback formula to predict overbend to overcome springback at any angle. | ||
| + | |||
| + | *STEP 6: Press the "Save to Part Setup" button. | ||
| + | |||
| + | The values will now be displayed at the bottom of the Part Setup menu. They will be used to calculate overbend to overcome springback when sending data to the bender. | ||
| + | |||
| + | <br><br> | ||
== Overbend Calculator Software Updates == | == Overbend Calculator Software Updates == | ||
Revision as of 14:57, 12 April 2014
 |
Reduce Scrap & Save Material by Predicting Springback BEFORE Bending the Part |
This is software that calculates overbend necessary to overcome springback in bends.
Contents |
Three Step Process for Predicting Springback
- STEP 1: Two test bends are made. Typically they are 20 and 120 degrees. The bender is set to bend these angles and a test tube is bent.
- STEP 2: The actual resulting bend angles are measured and entered into the overbend calculator.
- STEP 3: Formula constant values are calculated and used in a springback formula to predict overbend to overcome springback at any angle.
VTube-STEP and VTube-LASER
The fixed and proportional springback values are included in the Part Setup menu - and have an effect on sending especially new data to the bender. Because of this, the Overbend Calculator is embedded in VTube-STEP and VTube-LASER. To access the calculator inside VTube, follow these steps:
- STEP 1: Right click anywhere in the white column in the Part Setup menu.
- STEP 2: Choose Overbend Calculator in the context menu (the popup menu).
- STEP 3: Make a part with two test bends. Typically they are 20 and 120 degrees. The bender is set to bend these angles and a test tube is bent.
- STEP 4: The actual resulting bend angles are measured and entered into the overbend calculator.
- STEP 5: Formula constant values are calculated and used in a springback formula to predict overbend to overcome springback at any angle.
- STEP 6: Press the "Save to Part Setup" button.
The values will now be displayed at the bottom of the Part Setup menu. They will be used to calculate overbend to overcome springback when sending data to the bender.
Overbend Calculator Software Updates
| Screen Shot | Date Released | Link to Page | New Features |
|
October 13, 2009 | Overbend Calculator v7.1 |
|
|
April 6, 2009 | Overbend Calculator v7 |
|
Download
Download Overbend Calculator 15-day Trial Package (Shareware)
Other Pages
- Main Overbend Calculator Web Page
- Purchase an Activation Code: Online Store - Overbend Calculator Page
