Difference between revisions of "VTube-LASER v1.94"

Revision 1.94

• Back to VTube-STEP
• Back to VTube-STEP Revisions
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

(The VTube-STEP mode is included with VTube-LASER.) VTube-STEP can now import CSM M3 bender files.

• Import the centerline XYZ data.
• Or import the YBC data.
  
  

• Other values imported are:
  • Diameter
  • Wall Thickness
  • Pre Length (Start Length)
  • End Length
  • Cut Length
  • Pipe Material Note

Some output formats prefer to have a default tolerance built into the export, so now the Default Tolerance value is included in the VTube-LASER Part Setup menu.

The pop up menus for the Part Setup menu (STEP and LASER modes) now allow for the end diameters to be synchronized with the main diameter.

The Quick Open dialog now has a pull-down list that shows all the recent previous paths used to load VTube project files or imported solid model files.

Click on the previous path to use, and the folder tree on the left will open the new folder.

• Updated the Chinese translation.
  
  
• Updated the German translation.
  
  
• When VTube performs an alignment, it will now automatically switch to the Tangent point deviation menu to show updates in real-time.