Difference between revisions of "VTube-STEP v2.1"

Revision 2.1

• Back to VTube-STEP
• Back to VTube-STEP Revisions
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

This is a major new feature that allows you to add ANY solid model or surface to the collection. This type of collection is called a "COMPONENT".

• Since components can be any object that has a surface or is a solid, it is possible to select brackets, end components, holes, coping, or any other feature designed in the tube.
  
  
• Each component belongs to and is associated with a single straight of the tube. This allows components to be unbent with the new unbend feature (below).
  
  
• Once part of the collection, components stay persistently in the VTube project.
  
  
• Use the new Unbend feature to unbend the part with components to see the orientation and placement of the components to each other on a pre-bent part model.
  
  
• Select coping as components, then unbend the tube to see the orientation of the coping relative to each other on a pre-bent part.

This is a major new feature that allows you to unbend any bend in any order. (Click on the image on the right to see closeup descriptions of this feature.)

• Check any "Unbend" checkbox in the LRA grid, then refresh the graphics. The unbending is performed instantly.
  
  
• View and copy the unbent XYZ and LRA data in real-time. Use a popup menu to copy the entire grids or portions of the grids to the clipboard.
  
  
• Convert the unbent tube to the main tube memory with bends removed.
  
  
• Unbending always takes into account the tube elongation percentage in Part Setup. This means that tubes will unbend and the straightened arcs will shorten slightly to account for stretch.
  
  

The graphics viewport handles graphics faster than the previous versions.

• FASTER POINT LABELS: The point labels draw many times faster.
  
  
• FASTER COLLECTION: The process of building a collection (selecting surfaces and solids) is much faster in large imported assemblies. We've removed the long pauses between selection of surfaces.
  
  
• BETTER PERSPECTIVE PROJECTION: The perspective projection is much more identifiable than in previous versions.
  
  

Export to a TRACTO-TECHNIK CSV file with XYZ Data.

• The Path Manager now shows the operation for which it as asking you to choose a path.
  
  
• Also, the Path Manager is now used for all Import and Export features.
  
  

VTube now automatically sets the transparency of the imported model when it is imported.

The transparency value is controlled in the System Options, Graphic Setup menu.

• There is a new current VTube Project filename box in the upper left corner. This box now shows the entire path of the current project file, so that there is no doubt about which file will be saved if you press the Save button. The text in this box can be selected and copied to the clipboard.
  
  
• The Collection grid allows you to select multiple objects for editing features at the same time.
  
  
• When items are selected in the Collection grid, the associated object in the viewport turns orange.
  
  
• When collected items in the viewport are selected, the associated object in the collection list is highlighted
  
  
• The Collection grid has a popup menu with added features for editing the Collection entities.