Difference between revisions of "VTube-STEP v2.9.12"

From ATTWiki
Jump to: navigation, search
(→‎Version 2.9.12)
(→‎25pxNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION)
Line 90: Line 90:
  
 
</tr>
 
</tr>
−
 
−
</table>
 
−
<br><br>
 
−
 
−
<table cellpadding=10 width=1200>
 
−
<tr valign=top>
 
−
 
−
<td width=300>
 
−
===Follow these steps to setup VTube-LASER to split a bend then turn on "Split Bend Measuring"===
 
−
 
−
1 - Select the bend to split in an LRA grid.<br><br>
 
−
2 - Right click.<br><br>
 
−
3 - Choose "Split Selected Bend into Two Bends"<br><br>
 
−
4 - In the Bend Setup tab above the XYZ data, click on Split Bend Setup.<br><br>
 
−
5 - In the Split Bend Setup window, set the STRAIGHT with the ZERO straight length to "Split Bend at Apex" (It will equal the BEND number + 1). Watch the data compress and highlight in the LRA grid when you exit the window.<br><br><br>
 
−
VTube-LASER will now be ready to measure with the Split Bend scanning feature.<br><br>
 
−
 
−
See [[VTube-LASER Split Bend Feature]] for details on the Split Bend measuring feature.
 
−
 
−
</td>
 
−
 
−
<td>
 
−
 
−
[[image:Split Bend - Bend Setup for Split Bend USAF.png|800px]]
 
−
</td>
 
−
 
−
</tr>
 
−
 
  
 
</table>
 
</table>

Revision as of 04:24, 17 August 2018

Vtube-step logo 2.png

Revision 2.9.12

Release Date: August 16, 2018
Build: 5


Vtube-step v2.9 mainscreen headerassembly purple.png



Contents


Check.jpgNEW - NOTE LIST in PART SETUP For an UNLIMITED Number of Notes in a VTube Project

We received a request for more COMMENT and/or NOTE fields in Part Setup for VTube-LASER and VTube-STEP.

We added the new UNLIMITED NOTE LIST - which allows for any number of notes per project.

  • All the notes can be exported in the BATCH EXPORT mode in the Report menu.

  • All the notes can be included in a standard report.

  • The notes are stored in the VTube project file.


Vtl v2.9.12 notelist STEP.png





Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature

This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.

Vtl v2.9.12 notelist video.png



Check.jpgNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION

Splitting a bend into two adjacent half-bends manually is a bit complex. So we added this command to make it easy.

This new "split a bend" command is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.

After splitting a bend into two adjacent half-bends, you can use the SPLIT BEND measuring feature to scan the inside and outside of the actual bend to overcome this problem.

This new command is available in these grids:

  • Incremental LRA
  • Springback Compensated LRA
  • Absolute LRA

Vtl v2.9.12 splitbend into twobends.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-STEP_v2.9.12&oldid=38329"