Difference between revisions of "VTube-STEP v2.9.12"

From ATTWiki
Jump to: navigation, search
(→‎25pxNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION)
(→‎25pxNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION)
Line 75: Line 75:
  
 
<td width=300>
 
<td width=300>
−
Splitting a bend into two adjacent half-bends manually is a bit complex.  So we added this command to make it easy.<br><br>
+
<b>NOTE: This feature is provided mainly for VTube-LASER measuring. But it can also be used in VTube-STEP in preparation for VTube-LASER measuring.</b>
 +
<br><br>Splitting a bend into two adjacent half-bends manually is a bit complex.  So we added this command to make it easy.<br><br>
 
This new "split a bend" command is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.<br><br>
 
This new "split a bend" command is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.<br><br>
 
After splitting a bend into two adjacent half-bends, you can use the SPLIT BEND measuring feature to scan the inside and outside of the actual bend to overcome this problem.<br><br>
 
After splitting a bend into two adjacent half-bends, you can use the SPLIT BEND measuring feature to scan the inside and outside of the actual bend to overcome this problem.<br><br>

Revision as of 04:25, 17 August 2018

Vtube-step logo 2.png

Revision 2.9.12

Release Date: August 16, 2018
Build: 5


Vtube-step v2.9 mainscreen headerassembly purple.png



Contents


Check.jpgNEW - NOTE LIST in PART SETUP For an UNLIMITED Number of Notes in a VTube Project

We received a request for more COMMENT and/or NOTE fields in Part Setup for VTube-LASER and VTube-STEP.

We added the new UNLIMITED NOTE LIST - which allows for any number of notes per project.

  • All the notes can be exported in the BATCH EXPORT mode in the Report menu.

  • All the notes can be included in a standard report.

  • The notes are stored in the VTube project file.


Vtl v2.9.12 notelist STEP.png





Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature

This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.

Vtl v2.9.12 notelist video.png



Check.jpgNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION

NOTE: This feature is provided mainly for VTube-LASER measuring. But it can also be used in VTube-STEP in preparation for VTube-LASER measuring.

Splitting a bend into two adjacent half-bends manually is a bit complex. So we added this command to make it easy.

This new "split a bend" command is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.

After splitting a bend into two adjacent half-bends, you can use the SPLIT BEND measuring feature to scan the inside and outside of the actual bend to overcome this problem.

This new command is available in these grids:

  • Incremental LRA
  • Springback Compensated LRA
  • Absolute LRA

Vtl v2.9.12 splitbend into twobends.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-STEP_v2.9.12&oldid=38330"