Difference between revisions of "Safe Mode Cycle Hold"
(→About the Mode) |
(→About the Mode) |
||
| Line 18: | Line 18: | ||
</font> | </font> | ||
<font size=3> | <font size=3> | ||
| − | The only way to activate Safe Mode Cycle Hold is to either step on the safety mat or walk into the safety scanner. | + | The only way to activate Safe Mode Cycle Hold is to either step on the safety mat or walk into the safety scanner.<br> |
| + | <br>If you decide to work on a machine with the pump motor on, then at least step on the safety mat which disables all axes and blocks all hydraulic fluid from flowing to the hydraulic valves.<br><br> | ||
The only device that can move in this mode is the chuck close and open. | The only device that can move in this mode is the chuck close and open. | ||
</font> | </font> | ||
Revision as of 23:21, 3 October 2007
About the Mode
This mode is unique to CNC Bender software combined with SMT benders
(Maybe other benders have this feature - but we have only found others that do not have it.)
. It is a Zero Energy State mode when operators step on the safety mat. In this state, all motion axes are completely disabled, and energy to all axes is blocked or stopped.
Read more about the Zero Energy State on our CNC Benders.
|
|
