Difference between revisions of "Revision: Benderlink for Chiyoda/Keins 5.86"

Revision as of 05:39, 21 December 2007

New - Ask for Diameter Feature

Benderlink now asks for the user to enter a diameter value if data is being transferred to Supravision with a diameter value of ZERO.
This meets the requirement of ROMER DOCS software - which requires a valid diameter value in order to import data from a Supravision file.

New - Show NOTES Before SEND

Benderlink now shows the notes in a pop-up dialog before sending data using the SEND button on the main menu.

HOW TO CONFIGURE THE NAME

Description	Use the new field in the Bender Type window in Options to change the value. (Note: This is a low level menu that usually requires a password for entry.)
DO THIS Select a bender number then enter the new bender name in the edit box. Enter a unique name for every bender that is active on your Benderlink network.

Four New Passworded Sections

There are four new passworded sections available within Benderlink using the Password Manager software available to administrators.

They are BENDER, CHANNEL, GET, and SEND:

Bender Number Selection	The password is requested when pressing the green checkmark button to exit the Selection Dialog
Channel Selection	The password is requested when pressing the green checkmark button to exit the Selection Dialog
Get Button	The password is requested before data is retrieved from the bender
Send Button	The password is requested before data is sent to the bender

If an incorrect password is entered, then the operator will see a screen like this: