Difference between revisions of "Benderlink for Chiyoda"

Revision as of 19:16, 31 October 2008

This software is designed to communicate with Chiyoda and KEINS benders.

Feature	Description
1	It allows for intelligent bi-directional communications with measuring centers.
2	It allows for true DNC offline programming. This means that you can control every setup parameter from Benderlink (Note: All operator accessible parameters are programmable in touch-screen Chiyodas. A limited set of parameters are programmable in the older non-touchscreen versions of Chiyoda controls. The low level passworded machine parameters that control the personality of the bender are not programmable by Benderlink.)
3	It allows customers to use a PC disk / network to store all Chiyoda / KEINS parts off the control. (Bypassing the floppy drive.)

There are four license types. Each of these license levels allow you to custom-tailor your purchase with your application.

FULL Level 1	Communicate to manage file data for up to 99 benders.
FULL Level 2	Level 1 + EDIT bender data in Windows. This level include TubeCalc, Bender to XYZ Calculator, and the FIF Translator software packages
FULL Level 3	Levels 1 and 2 + enable CORRECTIONS LOOPS with measuring centers.
OFFLINE	The Benderlink offline license allows engineers to program Benderlink from a location that are off-site or at a remote location. The only difference between the OFFLINE license and the FULL license is that the OFFLINE version of the software will not communicate with benders. Typically offline license is used to save the data files to a shared network location. The full version of Benderlink that is connected to the bender can load the files created and saved with the offline version of Benderlink.

See the PDF data sheet section below for details.

	Download a Datasheet for Benderlink for Chiyoda Download a DataSheet Benderlink Ethernet Module for Chiyoda
	Download a DataSheet that explains the License Levels in Benderlink for Chiyoda/KEINS.

May 29, 2008	Revision: Benderlink for Chiyoda/Keins 5.92
May 6, 2008	Revision: Benderlink for Chiyoda/Keins 5.91
May 2, 2008	Revision: Benderlink for Chiyoda/Keins 5.90
March 14, 2008	Revision: Benderlink for Chiyoda/Keins 5.88
February 26, 2008	Revision: Benderlink for Chiyoda/Keins 5.87
December 19, 2007	Revision: Benderlink for Chiyoda/Keins 5.86
December 3, 2007	Revision: Benderlink for Chiyoda/Keins 5.85
July 30, 2007	Revision: Benderlink for Chiyoda/Keins 5.84
June 1, 2007	Revision: Benderlink for Chiyoda/Keins 5.82
February 12, 2007	Revision: Benderlink for Chiyoda/Keins 5.72
February 4, 2007	Revision: Benderlink for Chiyoda/Keins 5.71b

@@ Line 36: / Line 36: @@
 <tr>
 <td bgcolor="#e3e4f5">FULL Level 2</td>
-<td>Level 1 + '''EDIT bender data''' in Windows</td>
+<td>Level 1 + '''EDIT bender data''' in Windows.  This level include '''TubeCalc''', '''Bender to XYZ Calculator''', and the '''FIF Translator''' software packages</td>
 </tr>
 <tr>