Revision as of 01:12, 17 December 2008

CHANGES to CNC BENDER

You will find this new option in the Radius dynamic option list in the FRB page.

Stair-step through the radius levels in order to avoid tooling.

PDA motion-controlled jogs will no longer be allowed if the bend arm is not at or beyond 90 degrees.

This restriction is to protect accidental collision of the dies.

There is still no restriction on the direct axes jogs.

This command is no longer needed in CNC Bender

It is replaced with secondary process list "button_chuckclose.cncprocesslist"

@@ Line 1: / Line 1: @@
+[[image:Cncbender_logo_pushbending.png]]
+[[image:Operatorstation_model.jpg|right]]
+__NOTOC__
-[[image:CNC_Stair_Step_Radius_Level_Change.jpg]]
+=CHANGES to CNC BENDER=
+===[[image:Check.jpg|25px]] NEW - Stair-Stepping Radius Level Shifting  ===
+You will find this new option in the Radius dynamic option list in the FRB page.<br>
+<br>
+[[image:CNC_Stair_Step_Radius_Level_Change.jpg|150px]]<br><br>
+Stair-step through the radius levels in order to avoid tooling.
+<br><br>
 [[image:Cncbender_stairstep_radiuschange.jpg|300px]]
+<br>
+===[[image:Check.jpg|25px]] PDA Safety Feature  ===
+PDA motion-controlled jogs will no longer be allowed if the bend arm is not at or beyond 90 degrees.<br><br>
+This restriction is to protect accidental collision of the dies.<br><br>
+There is still no restriction on the direct axes jogs.
+===[[image:Check.jpg|25px]] Removed COMDEF: WatchPartInColletSwitch  ===
+This command is no longer needed in CNC Bender<br><br>It is replaced with secondary process list "button_chuckclose.cncprocesslist"