Difference between revisions of "Configuring Machine Lube Settings"
From ATTWiki
(→Value 4: "Watch For Machine Lube Complete Input") |
(→Other Pages) |
||
| Line 36: | Line 36: | ||
*Back to [[CNC Bender Technical Notes]] | *Back to [[CNC Bender Technical Notes]] | ||
*See [[Auto Lube]] for details on how to test the Auto Lube system | *See [[Auto Lube]] for details on how to test the Auto Lube system | ||
| + | *See [[Configuring Machine Lube Settings]] | ||
| + | *See [[CNCProcessor.cfg]] | ||
Revision as of 21:12, 28 January 2009
Contents |
In the CNCProcessor.cfg File
The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.
Configuration Section: "Machine Lube"
The settings in this file are separated by sections with section names in square brackets. This is an example:
[Machine Lube] Machine Lube Duration=5000 Lube Machine At Bend Count=100 Pulse Machine Lube Pump=1 Watch For Machine Lube Complete Input=0
The four values above control the machine lube features in CNC Bender.
Value 1: "Machine Lube Duration"
- Read how to set the Machine Lube Duration
Value 2: "Lube Machine At Bend Count"
- Read how to set the Lube Machine At Bend Count
Value 3: "Pulse Machine Lube Pump"
- Read how to set the Pulse Machine Lube Pump
Value 4: "Watch For Machine Lube Complete Input"
- Read how to set the Watch For Machine Lube Complete Input
Other Pages
- Back to CNC Bender Technical Notes
- See Auto Lube for details on how to test the Auto Lube system
- See Configuring Machine Lube Settings
- See CNCProcessor.cfg
