Difference between revisions of "Lube Machine At Bend Count"
From ATTWiki
(→Calculating the Value PER SHIFT) |
(→Calculating the Value PER SHIFT) |
||
| Line 24: | Line 24: | ||
2000 bends per shift | 2000 bends per shift | ||
2000 x 2 = 4000 Bend Arm Moves | 2000 x 2 = 4000 Bend Arm Moves | ||
| + | |||
If you want to lube 3 times per shift, then... | If you want to lube 3 times per shift, then... | ||
4000 Bend arm moves / 3 times each shift = | 4000 Bend arm moves / 3 times each shift = | ||
Revision as of 21:18, 28 January 2009
What is It?
This is a property in the CNCProcessor.cfg file. It is a bend count that instructs CNC Processor to enable the machine lube event when the bend count reaches a preset value.
Value
The value is set from 1 to any value greater than 1 like this:
Lube Machine At Bend Count= 4000
The value of 4000 in this example represents 4000 motions of the bend arm. Therefore, the machine would be lubed about every 2000 bends using the 4000 count.
Calculating the Value PER SHIFT
- Estimate the number of bends you may produce in a shift
- Multiply the number of bends X 2 to get BEND ARM MOVES per shift
- Determine how many times you want to lube the machine during a shift.
- Divide the BEND ARM MOVES with the number of machine lubes you would like per shift
2000 bends per shift 2000 x 2 = 4000 Bend Arm Moves If you want to lube 3 times per shift, then... 4000 Bend arm moves / 3 times each shift = Lube Machine At Bend Count= 1333
Other Pages
- Back to CNC Bender Technical Notes
- See Auto Lube for details on how to test the Auto Lube system
- See Configuring Machine Lube Settings
- See CNCProcessor.cfg
