Difference between revisions of "Configuring Machine Lube Settings"
From ATTWiki
(→Configuration Section: "Machine Lube") |
(→Configuration Section: "Machine Lube") |
||
| Line 17: | Line 17: | ||
</pre> | </pre> | ||
| − | The four values control the machine lube features in CNC Bender. | + | The four values control the machine lube features in CNC Bender. Read about each of them here: |
| − | + | ||
<table cellpadding=10> | <table cellpadding=10> | ||
Revision as of 21:41, 28 January 2009
Contents |
In the CNCProcessor.cfg File
The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.
Configuration Section: "Machine Lube"
The settings in this file are separated by sections with section names in square brackets. This is an example:
[Machine Lube] Machine Lube Duration=5000 Lube Machine At Bend Count=100 Pulse Machine Lube Pump=1 Watch For Machine Lube Complete Input=0
The four values control the machine lube features in CNC Bender. Read about each of them here:
| Feature | Read |
| Lube for how long? | Machine Lube Duration |
| How many bends to the next lube? | Lube Machine At Bend Count |
| Pulse the output? | Pulse Machine Lube Pump |
| Keep going until the lube is complete? | Watch For Machine Lube Complete Input |
Other Pages
- Back to CNC Bender Technical Notes
- See Auto Lube for details on how to test the Auto Lube system
- See Configuring Machine Lube Settings
- See CNCProcessor.cfg
