Revision as of 13:01, 16 March 2010

Type of Upgrade: Feature Upgrade

New Bend option added

Value Type	The value is entered as a floating point percentage.
+ or -	The value can be positive or negative.
Impact of Negative Values	Negative values slow the calculated speed of the Feed axis.
Example +	A value of +100 would double the speed of the Feed axis during draw bending.
Example -	A value of -100 would set the speed at 0 for the Feed axis during draw bending.

The table at the right shows an example of a -10% change in the processlist:

See vel0 calculated at 100%:

See the same velocity with the option set to -10 (which represents 90% speed):

@@ Line 49: / Line 49: @@
 <tr valign=top>
 <td width=300>
-This is an example of a -10% change in the processlist:
+The table at the right shows an example of a -10% change in the processlist:
 </td>
 <td>
-Speed calculated at 100% (see vel0)<br>
+See vel0 calculated at 100%:<br>
 [[image:processlist_feedspeedadjustbefore.jpg|400px]]<br><br>
-Same speed calculated at 90%(see vel0)<br>
+See the same velocity with the option set to -10 (which represents 90% speed):<br>
 [[image:processlist_feedspeedadjustafter.jpg|400px]]
 </td>

Difference between revisions of "CNC Bender v12-20100316"