Revision as of 04:23, 15 December 2011

v12-20111215

CNC Bender can load and run an external program at the moment it changes part numbers in Auto mode.
A new option is in Low Level options list that is called "External File To Run When Part Changes In Processor". Enter the name of the external executable file and CNC Processor will run the program any time a new part number is run in Auto mode.

A new communications program can be run by the new feature described above.
The program loads into memory, loads the current part from the part log, sends the data to the Fanuc robot, then closes.

Importing older part files now brings the Tool data into memory also.
Several new PREBEND options allow for better control of the seam detect option in the Rotate Axis.

@@ Line 53: / Line 53: @@
 <tr valign=top>
 <td width=400>
-* Fixed the labeling in some of the general dynamic options.<br><br>
+* Importing older part files now brings the Tool data into memory also.<br><br>
-* Removed the halt after every jog command in order to allow gearing settings to remain for the following setup jogs.
+* Several new PREBEND options allow for better control of the seam detect option in the Rotate Axis.<br><br>
 </td>