Difference between revisions of "End-Scan Using the Scissor Motion"

From ATTWiki
Jump to: navigation, search
(→‎Approve the Measurement On the Screen)
(→‎Using End Target Adapters)
Line 49: Line 49:
  
  
−
===Using End Target Adapters===
 
−
 
−
<table cellpadding=10>
 
−
<tr valign=top>
 
−
<td width=300>
 
−
<br><br>
 
−
* If you prefer using more durable end target adapter that plugs into the end of the tube, then they can be manufactured for repeatable measurements.<br><br>
 
−
* The end target surface should be painted or covered with a flat white or near-white target.<br><br>
 
−
* The offset from the target to the tube end is entered as a negative value in the Part Setup menu for either end.
 
−
</td>
 
−
<td width=300>
 
−
[[image:EndTargetPlugDesign.jpg|300px]]
 
−
</td>
 
−
</tr>
 
−
</table>
 
  
  
  
 
* Back to [[VTube-LASER]]
 
* Back to [[VTube-LASER]]

Revision as of 22:41, 27 January 2012

Vtube-laser logo.jpg How to perform quick scissor motion end-scans.

Vtube-laser 1 73.jpg


Why the End-Scan technique is important

This end-scan method is useful for ease-of-use and quickness.

Please keep in mind that our tests show that it is the least precise of the techniques that we recommend.

We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.

How To Use This End-Scan Technique

  • Align the scanner with a slight scissor angle across the end as is shown in the image on the right

  • Press the green button until VTube-LASER is finished scanning all the end stripes.

EndWithScissorCloseup.jpg

EndWithScissor.jpg





Retrieved from "http://www.advancedtubular.wiki/index.php?title=End-Scan_Using_the_Scissor_Motion&oldid=17484"