Difference between revisions of "VTube-LASER v1.80"
From ATTWiki
(→Transform Tab in MASTER Data) |
(→Transform Tab in MASTER Data) |
||
| Line 30: | Line 30: | ||
After transformation with bend 1 true to the XY plane:<br> | After transformation with bend 1 true to the XY plane:<br> | ||
[[image:vtube_hvac_transform_one.jpg|300px]]<br> | [[image:vtube_hvac_transform_one.jpg|300px]]<br> | ||
| + | <br><br> | ||
===End Trim Fix=== | ===End Trim Fix=== | ||
Revision as of 05:10, 17 November 2012
|
Revision 1.80
|
|
- See VTube-LASER Customer Support Page to download the latest version.
Transform Tab in MASTER Data
- Transform the centerline orientation so that any bend is true.
- The 0,0,0 datum is always placed at the center of the true bend radius.
Before transformation:
After transformation with bend 1 true to the XY plane:
End Trim Fix
- In the inspection grid, the end trim lengths were 1/2 the correct value in one bend parts.
- This is repaired.
Other Pages
- Back to the VTube-LASER page
- See VTube-LASER Customer Support Page to download the latest version.
