Difference between revisions of "TubeCAD Pro v8-20130206"

TubeCAD Pro can now import an XYZ text file that contains centerline coordinates. This is the same text file that the older TubeCAD DOS software could import. This is the format:

In previous versions, it was necessary to press Enter to reset the grid. This was confusing to new users, so we added new SET buttons.

The new SET button allows you to change the number of rows in either XYZ grid without exiting the point count edit box.

The DXF build location can be adjusted in the Options dialog.

Right click on the viewport, then choose Options to access this menu.

The centerline labels are now positioned in better locations so that they don't overlap the diameters.

The algorithm moves the points away from the tube on the outside of the bends if possible.

Now if the filename is empty or untitled, then TubeCAD will automatically use the Part Number as the suggested first file name.

Negative and positive rotation values that are in the same place in space (like 270 and -90) are no longer treated as synchronization errors that are out of tolerance.

The Enter Total Length Box value in the Absolute Bender Data page in General Specifications was being corrupted when it was changed by the operator. This has been fixed.