Difference between revisions of "Controlling Deadband"

From ATTWiki
Jump to: navigation, search
(Created page with "Deadband can be controlled by taking these steps. ==STEP 1: Create a new CIO == <table> <tr> <td width=500> Create a new CIO for the servo module in the CIO Editor like this...")

Revision as of 14:34, 9 August 2013

Deadband can be controlled by taking these steps.

STEP 1: Create a new CIO

Create a new CIO for the servo module in the CIO Editor like this:
Cncbender cio deadband.png